GE Fanuc IC693PWR330P Series 90-30 Power Supply Module
Manufacturer: GE Fanuc
-
Part Number: IC693PWR330P
Condition：New with Original Package
Product Type: Power Supplies
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693PWR330P Series 90-30 Power Supply Module
The GE Fanuc IC693PWR330P, also cataloged as the IC693PWR330 High-Capacity Power Supply Module, operates as a dedicated hardware component for primary system power conversion and distribution within Series 90-30 PLC racks. It installs in the leftmost slot of the baseplate, accepting 85 to 264 VAC or 100 to 300 VDC inputs to supply regulated output rails of +5 VDC (up to 30 W), +24 VDC Relay (up to 15 W), and +24 VDC Isolated power (up to 20 W) across the internal backplane bus. An integrated serial port on the front panel provides physical connectivity for RS-485 serial communication.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693PWR330P |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.68 kg (1.50 lbs) |
| Dimensions | Single-slot Series 90-30 footprint |
| Operating Temp | 0 to 60 deg C (32 to 140 deg F) |
| Power Consumption | Input: 90 VA (AC) / 50 W (DC); Total Output Load Capacity: 30 W max |
| Input Voltage Range | 85 to 264 VAC (50/60 Hz) or 100 to 300 VDC |
| Output Ratings | +5 VDC (30 W max), +24 VDC Relay (15 W max), +24 VDC Isolated (20 W max) |
| Output Voltage Range | +5 VDC: 5.0-5.2 VDC; +24 VDC Relay: 24-28 VDC; +24 VDC Isolated: 21.5-28 VDC |
| Holdup Time | 20 ms minimum |
| Protective Limits | Overvoltage (6.4-7.0 V on +5 VDC rail), Overcurrent (7 A max) |
| Serial Port Interface | Integrated RS-485 serial port |
Deterministic Power Distribution & Backplane Regulation
The IC693PWR330P manages backplane bus communication velocity and logic execution stability by maintaining tightly regulated DC voltage rails under variable AC or DC line conditions. Internal power conditioning circuits enforce active overvoltage and overcurrent shutdown limits, preventing field transients from compromising internal backplane buses or microprocessor memory structures. The module's +24 VDC isolated rail delivers clean power to expansion options, while firmware flash compatibility and diagnostic messaging route seamlessly through the built-in RS-485 interface to support external programming tools and slave protocols.
Frequently Asked Questions
Q: What is the mandatory installation position for the IC693PWR330P power supply on a Series 90-30 baseplate?
A: The IC693PWR330P must mount strictly in the leftmost slot (Slot 0) of the Series 90-30 baseplate to properly align with the dedicated backplane power trace pins.
Q: Can the total combined output power across all three voltage rails exceed 30 W?
A: No, while individual rails have specific maximum power ratings (+5 VDC at 30 W, +24 VDC Relay at 15 W, +24 VDC Isolated at 20 W), the combined simultaneous load on all three outputs must not exceed the total module capacity of 30 W.
Q: What happens if an overvoltage condition occurs on the +5 VDC logic supply rail?
A: The module contains internal protective limits that trigger a power supply shutdown if the +5 VDC output exceeds the 6.4 to 7.0 V threshold, isolating downstream CPU and I/O cards from voltage surges.
Field Installation Guidelines
- Main Power De-energization: Ensure all AC or DC main feeder lines connected to the 6-terminal terminal block are disconnected before installing, wiring, or replacing the power supply unit.
- Grounding and Terminal Wiring Protocol: Connect the system protective earth (PE) ground directly to the designated ground terminal on the module using low-impedance copper conductors to ensure proper surge suppression and noise filtering.
- RS-485 Cable Shielding: Route the RS-485 serial communication wiring in twisted-shielded pair cabling, maintaining separation from high-voltage AC input lines to minimize electromagnetic interference.