GE Fanuc IC695CPE305-ABAH PACSystems RX3i CPU Module
Manufacturer: GE Fanuc
-
Part Number: IC695CPE305-ABAH
Condition：New with Original Package
Product Type: CPU Processors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC695CPE305-ABAH PACSystems RX3i CPU Module
Configured for high-speed logic execution and communication routing in PACSystems RX3i platforms, the GE Fanuc IC695CPE305-ABAH (IC695CPE305 CPU Module) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695CPE305-ABAH |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 1.64 kg |
| Dimensions | 130 x 152 x 140 mm |
| Operating Temp | 0 to +60 deg C |
| Power Consumption | 1 Amp at +5 VDC and +3.3 VDC, 0.5 Amps at +24 VDC |
| Processor Clock Speed | 1.1 GHz |
| Memory Storage | 5 MB SRAM user memory, 10 MB Flash |
| Serial Interfaces | RS-232, RS-485 |
| Ethernet Interface | 10/100 Mbps RJ45 |
| Protocols Supported | Modbus RTU Slave, SNP, Serial I/O, SRTP, Ethernet Global Data |
| Rack Capacity | Supports up to 8 local racks |
| Program Execution | Up to 512 program blocks (128 KB max block size) |
Backplane Bus Communication Velocity Licences and Deterministic Networks
The GE Fanuc IC695CPE305-ABAH integrates a 1.1 GHz PowerPC processing core directly interfaced to the RX3i PCI backplane bus architecture, optimizing I/O density scaling across up to 8 local expansion racks. Deterministic serial communication paths operate via integrated RS-232 and RS-485 interfaces, executing Modbus RTU and SNP protocols without bottlenecking logic sweep cycles. Firmware flash compatibility across backplane slots ensures synchronous execution of up to 512 program blocks while maintaining background Ethernet communication over SRTP and EGD protocols.
Frequently Asked Questions
Q: Which battery modules are compatible with the IC695CPE305-ABAH for SRAM backup?
A: The module supports the IC695ACC302 Lithium Smart Battery, IC693ACC302 Series 90-30 Auxiliary Battery Module, and IC698ACC701 Smart Coin Cell Battery Pack to retain volatile program memory during complete power shutdowns.
Q: How fast is the redundant rack switchover response for this processor?
A: Switchover time executes within a maximum of 1 logic scan cycle, with a minimum hardware response speed of 3.133 ms.
Q: What power rails does the CPU module draw from the RX3i backplane?
A: The processor draws 1 Amp from the combined +5 VDC and +3.3 VDC backplane supply lines and 0.5 Amps from the +24 VDC auxiliary supply line.
Field Installation Guidelines
- System Power Isolation: Ensure all main power feeds to the RX3i Universal Backplane are de-energized before inserting or removing the CPU module.
- Chassis Alignment: Align the rear module connectors with slot 0 or slot 1 of the IC694CHS series universal backplane and press firmly until the module latches secure it into place.
- Grounding Connection: Attach a heavy-gauge copper ground conductor directly from the RX3i rack frame earth terminal to the main system cabinet earth bus.
- Serial Cable Shielding: Terminate RS-232 and RS-485 communication cable drain wires to designated cabinet earth clamps to prevent electromagnetic noise coupling on serial channels.
- Battery Pack Installation: Connect the IC695ACC302 or IC698ACC701 battery connector to the module front panel header prior to energizing backplane power to ensure uninterrupted NVRAM retention.