GE Fanuc IC695CPU310-FS 300MHz CPU Processor Module
Manufacturer: GE Fanuc
-
Part Number: IC695CPU310-FS
Condition：New with Original Package
Product Type: CPU Processors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC695CPU310-FS PACSystems RX3i CPU Processor Module
Configured for core logic execution and real-time control in PACSystems RX3i backplane architectures, the GE Fanuc IC695CPU310-FS (IC695CPU310 CPU Processor Module) provides direct physical/electrical execution for up to 320 local and expansion I/O channels.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695CPU310-FS |
| Brand | GE Fanuc / Emerson |
| Origin | USA |
| Weight | 0.45 kg |
| Dimensions | 220 mm x 115 mm x 30 mm |
| Operating Temp | 0 to 60 deg C |
| Storage Temp | -40 to 85 deg C |
| Power Consumption | 10 W maximum @ 24 VDC (+/-10%) |
| Processor | 300 MHz RISC Architecture |
| Program Memory | 2 MB User Logic |
| System Memory | 128 MB RAM, 64 MB Flash |
| Battery Backup | Included for non-volatile RAM data retention |
| Communication Ports | Dual RS-232/RS-485 serial ports, 1x Ethernet port, 1x USB programming port |
| Protocols | Modbus RTU/TCP, SNP, Ethernet Global Data (EGD) |
| Maximum I/O Capacity | 320 local I/O points |
| Relative Humidity | 5% to 95%, non-condensing |
Backplane Bus Communication Velocity and Firmware Compatibility
The processor resides in the dedicated CPU slot of the PACSystems RX3i baseplate, driving high-speed PCI backplane bus transactions to coordinate system-wide scan cycles. Firmware flash compatibility allows real-time execution of complex instruction sets, online logic modification, and automated diagnostics without interrupting cycle execution. Integrated dual serial and Ethernet channels manage deterministic network synchronization, offloading communication overhead from the primary 300 MHz engine to maintain consistent logic solution times.
Frequently Asked Questions
Q: Can the IC695CPU310-FS module be extracted or inserted while the RX3i system rack is powered?
A: No, the CPU module does not support hot-swapping. Rack supply power must be completely turned off before removing or installing the processor module to prevent memory corruption or hardware damage.
Q: How is logic program memory retained during a main power failure?
A: Non-volatile user memory is preserved via battery-backed RAM, which maintains user logic and system memory registers when backplane operating voltage drops below specified thresholds.
Q: What diagnostic indicators are accessible on the module front panel during operation?
A: Built-in LED status indicators provide visual feedback for CPU operation, run/stop states, battery condition, forced signals, and system fault alerts.
Field Installation Guidelines
Ensure the main power supply to the RX3i baseplate is isolated prior to installation. Align the IC695CPU310-FS circuit board edge with the CPU slot guide rails and push firmly until the rear multi-pin backplane connector seats tightly into the rack socket. Secure the module retention screw to maintain earth continuity across the mounting frame. Route Ethernet and serial cables through cable management channels, maintaining a separation distance of at least 30 cm from high-voltage AC conductors and drive wiring. Ground all communication shielding to the cabinet ground bus bar to suppress ambient electromagnetic noise.