GE Fanuc IC695ETM001CA-ER Ethernet Module | New & Original Stock
Manufacturer: GE Fanuc
-
Part Number: IC695ETM001CA-ER
Condition：New with Original Package
Product Type: Ethernet Interface Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC695ETM001CA-ER PACSystems RX3i Series
The GE Fanuc IC695ETM001CA-ER, also cataloged as the GE Fanuc IC695ETM001CA Ethernet Interface Module, operates as a dedicated hardware component for high-speed network communication within PACSystems RX3i platform networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695ETM001CA-ER |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.35 kg |
| Dimensions | 160 mm x 100 mm x 45 mm |
| Operating Temp | 0 to +60 deg C |
| Power Consumption | Backplane logic draw dependent |
| Ports | 2 x 10/100 Mbps Ethernet (RJ-45) |
| Protocols Supported | Modbus TCP/IP, SRTP, Ethernet Global Data (EGD), SNMP |
| Connection Capacity | Up to 64 simultaneous TCP/IP connections |
| IP Addressing | Static or DHCP assignment |
| Compatible Platform | PACSystems RX3i |
| Programming Environment | Proficy Machine Edition |
| Indicators | LED status for LINK, ACTIVITY, and MODULE OK |
| Storage Temperature | -40 to +85 deg C |
| Humidity | 5-95% RH, non-condensing |
| Certifications | UL, CE, CSA, RoHS compliant |
Industrial Control and Drives Deterministic Networking
The interface module executes high-throughput network routing across the internal dual PCI and serial backplane pathways. It scales system connectivity metrics by utilizing Profinet / EtherNet/IP deterministic networks to bind supervisory workstations and adjacent controllers into a synchronized network matrix. The module integrates specific backplane bus communication velocity Licences to process up to 64 simultaneous TCP/IP connections without degrading logic scan intervals. Complete firmware flash compatibility ensures synchronized parameter updates across Modbus TCP/IP, SRTP, and Ethernet Global Data (EGD) pipelines, enforcing deterministic transaction times across critical automation infrastructures.
Frequently Asked Questions
Q: What are the backplane current constraints and loading limits when inserting multiple IC695ETM001CA-ER modules into a single RX3i rack?
A: Each communication module draws its operational logic power directly from the 5 VDC and 3.3 VDC backplane power rails. Engineers must verify that the cumulative milliamp load of all active modules does not exceed the rated output capacity of the designated RX3i power supply unit.
Q: Does this module support live hot-swap replacement during active network execution?
A: The PACSystems RX3i rail infrastructure permits hot-swap operations for this module type. However, extraction of an active interface breaks all 64 simultaneous TCP/IP connections instantly, requiring network redundancy protocols or hot-standby CPU configurations to handle data tracking during the physical module exchange.
Field Installation Guidelines
- Chassis Alignment and Insertion: Insert the module into the selected standard slot of the RX3i universal backplane. Force the card along the molded chassis guides until the rear connectors mate fully with the backplane, then lock the top and bottom tab retention brackets.
- Communication Cable Isolation: Route the Category-rated twisted-pair Ethernet lines through low-noise cable ducts. Keep all network communication wires physically isolated from high-voltage AC conductors, inductive switching devices, and motor drive leads to limit external noise injection.
- Shield Ground Integrity: Ensure the RJ-45 cable shields connect securely to the metallic grounding frame of the port interfaces. The RX3i rack frame must maintain a low-impedance bond to the central factory instrumentation earth ground bar to ensure continuous cross-talk suppression.