GE Fanuc IC695MDL664CA PACSystems RX3i Digital Input Modules
Manufacturer: GE Fanuc
-
Part Number: IC695MDL664CA
Condition：New with Original Package
Product Type: Digital Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC695MDL664CA PACSystems RX3i Smart Input Module
The GE Fanuc IC695MDL664CA, also cataloged as the IC695MDL664CA Smart Input Module, operates as a dedicated hardware component for high-speed digital state evaluation and real-time field signal monitoring within PACSystems RX3i platforms. The assembly incorporates 16 diagnostic digital input points configured for 24 VDC positive logic operation, executing continuous logic state updates across a operating range of 20 to 30 VDC. Configurable filtering speeds from 0.5 ms to 100 ms allow precise signal adaptation, while integrated diagnostics perform real-time open-wire and short-circuit fault evaluations directly at the input hardware level.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695MDL664CA |
| Brand | GE Fanuc |
| Origin | United States |
| Weight | 0.8 kg |
| Dimensions | 141.4 mm x 264.9 mm x 147.3 mm |
| Operating Temp | 0 deg C to +60 deg C |
| Power Consumption | 225 mA @ 5 VDC, 95 mA @ 3.3 VDC |
| Input Channels | 16 diagnostic digital inputs |
| Logic Type | Positive logic (ON when voltage applied) |
| Input Voltage | 24 VDC nominal (20 to 30 VDC range) |
| ON/OFF Thresholds | ON: >0.5 x VIN, OFF: <0.2 x VIN |
| Filter Response Time | Selectable from 0.5 ms to 100 ms |
| Isolation | Channel-to-system electrical isolation |
| Certifications | UL 508, CSA C22.2, Class I Div 2 |
Backplane Bus Communication & Firmware Flash Compatibility
The module integrates directly into the PACSystems RX3i backplane, utilizing high-velocity bus communication to stream 16-point digital states and diagnostic status bits to the primary CPU within deterministic scan frames. Onboard firmware flash compatibility enables dynamic parameter configuration through Proficy Machine Edition software without hardware jumper changes. This architecture allows operators to alter channel response times, toggle open-wire diagnostic alarms, and manage fault reporting tables online, maintaining high backplane throughput while minimizing local controller overhead.
Frequently Asked Questions
Q: How does the IC695MDL664CA module report individual channel wiring disruptions?
A: The onboard diagnostic firmware continuously checks circuit integrity across all 16 positive-logic channels, immediately raising open-wire and short-circuit fault flags on the backplane bus while illuminating channel-specific LED indicators.
Q: Can input response times be configured individually across the 16 digital channels?
A: Yes, configuration software allows engineers to adjust input filtering times between 0.5 ms and 100 ms to suppress electrical contact chatter or capture rapid digital state transitions.
Field Installation Guidelines
Ensure the target PACSystems RX3i rack slot is fully de-energized prior to hardware mechanical engagement. Guide the module along the upper and lower slot alignment rails until the backplane connector seats completely into the bus socket, then tighten the retaining screws to ensure proper mechanical bonding and chassis grounding. Strip 24 VDC input wiring to specified lengths and secure conductor leads into the terminal block assembly, ensuring field supply wiring maintains physical separation from high-voltage AC cables inside wiring troughs by at least 200 mm. Verify that cabinet convection cooling maintains ambient operating temperatures between 0 deg C and +60 deg C under non-condensing relative humidity conditions up to 95%.