GE Fanuc IC695PBM300 PROFIBUS Master | New & Original Stock
Manufacturer: GE Fanuc
-
Part Number: IC695PBM300-CC
Condition：New with Original Package
Product Type: PLC Communication Cards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC695PBM300 PROFIBUS DP Master Module
The GE Fanuc IC695PBM300-CC, also cataloged as the IC695PBM300 PROFIBUS Master Module, serves as the primary IC695 PROFIBUS Master Module utilized to execute high-speed industrial network data exchange across PACSystems RX3i platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695PBM300-CC / IC695PBM300 |
| Brand | GE Fanuc (Emerson Automation) |
| Origin | USA |
| Weight | 0.14 kg (0.31 lbs) |
| Dimensions | Standard PACSystems RX3i single-slot module dimensions |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 1.45 W (440 mA @ 3.3 VDC backplane current draw) |
| Module Type | PROFIBUS-DP Master Module (DP-V1 supported) |
| System Line | PACSystems RX3i |
| Backplane Compatibility | RX3i PCI Universal Backplane |
| Supported Baud Rates | 9.6K, 19.2K, 93.75K, 187.5K, 500K, 1.5M, 3M, 6M, 12M Baud |
| Slave Capacity | Up to 125 PROFIBUS-DP slave nodes |
| Node I/O Buffer Limits | 244 Bytes input / 244 Bytes output per individual slave |
| Network Aggregate Capacity | Up to 3584 input bytes and 3584 output bytes |
| Total Slave Config Memory | Approximately 9 KB limit |
| Communication Ports | 1 x PROFIBUS Master Port, 1 x RS-232 Port |
| Diagnostics Mechanisms | Slave Status Bit Array, Network/Master counters, Slave Addresses |
Profinet / EtherNet/IP Deterministic Networks and I/O Density Scaling
The GE Fanuc IC695PBM300 links legacy field networks into modern Profinet or EtherNet/IP deterministic networks via the PACSystems RX3i central processor. Operating over the high-speed RX3i PCI backplane bus, this module provides deterministic synchronization for up to 125 field nodes while maintaining isolated diagnostic monitoring counters. Large-scale I/O density scaling is managed within a strict 9 KB slave configuration memory limit, allowing aggregate cyclic data routing of up to 3584 input and 3584 output bytes without degrading host backplane bus communication velocity. The onboard processor supports firmware flash compatibility via standard engineering tools to enforce execution constraints across mixed-vendor DP-V1 networks.
Frequently Asked Questions
Q: What are the minimum programming software version parameters required to configure the network matrix? A: Hardware parameterization and slave node mapping require Machine Edition Logic Developer PLC version 5.0 Build 3227 SP2 or later. If deploying customized C-coded control strategies, the application must be compiled using the PLC C Toolkit Version 4.00 Build 50A1 or later.
Q: Is Direct Directed Input/Output (DOIO) execution supported through this module interface? A: No. DOIO functionality is entirely unsupported by the embedded module firmware. Utilizing a DOIO function block targeting this interface inside the application logic will instantly return an execution error status word to the host CPU block.
Field Installation Guidelines
- Backplane Insertion Constraints: Ensure the unit is installed solely within a standard PCI-compatible slot of an RX3i Universal Backplane. Turn off all system power supplies prior to seating the single-slot module to prevent backplane bus transients.
- Network Cable Shield Termination: Ground the outer copper braided shield of the PROFIBUS network cable directly to the metal housing of the DB-9 industrial connector. Ensure line termination switches are flipped to the active position ("ON") exclusively at the physically first and last nodes of the network segment.
- Vibration and Thermal Mitigation: Secure the module faceplate using the integrated chassis mounting screws. Maintain unrestricted perimeter airflow patterns around the RX3i enclosure to prevent internal module operating temperatures from exceeding the 60 deg C performance limit.