GE Fanuc IC695SPF010 RX3i 1000BASE-LX SFP Transceiver Module
Manufacturer: GE Fanuc
-
Part Number: IC695SPF010
Condition：New with Original Package
Product Type: Transceiver Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC695SPF010 PACSystems RX3i Transceiver Module
The GE Fanuc IC695SPF010, also cataloged as the IC695SPF010 Small Form-Pluggable Transceiver Module, operates as a dedicated hardware component for high-speed optical signal conversion and 1000BASE-LX Gigabit Ethernet data transmission up to 10 km within PACSystems RX3i PROFINET scanner networks. The module interfaces via single-mode fiber (SMF) through SFP cage connections, executing full-duplex 1000 Mbps deterministic bus data transfers with an operating power draw ranging from 3.3 VDC to 5 VDC.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695SPF010 |
| Brand | GE Fanuc / Emerson |
| Origin | USA |
| Weight | 0.03 kg |
| Dimensions | 100 x 22 x 130 mm |
| Operating Temp | 0 to +60 deg C |
| Power Consumption | 1.1 A @ 5 VDC; 1.9 A @ 3.3 VDC (with dual SFPs) |
| Communication Speed | 1000 Mbps (Gigabit) |
| Media Interface | Single-mode fiber (SMF) via SFP cage |
| Optical Reach | Up to 10 km (1000BASE-LX) |
| Network Topology | Line, Star, Ring, Daisy Chain |
| Physical Connectors | 2 x RJ-45 copper ports, 2 x SFP cages |
| Configuration Transfer | SD card slot, USB port (WinLoader) |
Deterministic Networks & Firmware Flash Compatibility
The IC695SPF010 integrates directly into PROFINET deterministic networks, executing scan times below 1 ms for real-time distributed I/O control. Firmware flash compatibility allows onsite updates through the dedicated USB interface using WinLoader utility software without disturbing existing rack wiring or backplane bus configurations. Embedded non-volatile memory combined with SD card support enables rapid transfer of system configuration parameters, ensuring rapid replacement cycles and deterministic network stability across redundant ring architectures.
Frequently Asked Questions
Q: What optical fiber type and maximum transmission distance are supported by the IC695SPF010?
A: The module utilizes single-mode fiber (SMF) operating on the 1000BASE-LX standard to support link distances up to 10 km.
Q: How are firmware updates performed on the IC695SPF010 transceiver module?
A: Firmware flashing is executed via the built-in USB port using the WinLoader software utility without requiring module extraction from the RX3i rack.
Q: What network topologies does the IC695SPF010 support in PROFINET applications?
A: The module supports line, star, ring, and daisy-chain topologies through its dual RJ-45 copper and dual SFP optical ports.
Field Installation Guidelines
De-energize the host RX3i rack or scanner module base before inserting or removing SFP optical transceivers. Insert the IC695SPF010 SFP module into the target SFP cage until the latching mechanism clicks firmly into position. Maintain the minimum bend radius of the single-mode optical fiber cabling to prevent signal attenuation or mechanical stress on the ceramic ferrule.
Clean optical connectors with lint-free alcohol wipes before insertion to prevent dust contamination inside the optical transceiver port. Route fiber optic cables through designated wire raceways separate from heavy AC power conduits. Ensure ground connections across the metal shield of the RJ-45 ports tie back to the enclosure main earthing bar to prevent high-frequency noise interference.