GE Fanuc IC697PWR711H 100W AC/DC Power Supply Modules
Manufacturer: GE Fanuc
-
Part Number: IC697PWR711H
Condition：New with Original Package
Product Type: Power Supply Units
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC697PWR711H Series 90-70 Power Supply Module
The GE Fanuc IC697PWR711H, also cataloged as the IC697PWR711 Power Supply Module, operates as a dedicated hardware component for multi-voltage backplane power conversion within Series 90-70 PLC platforms. Installed into the leftmost rack slot via a 48-pin backplane connector, the unit supplies regulated +5 VDC, +12 VDC, and -12 VDC power rails to drive logic circuits, processors, and field I/O modules across single or dual-rack chassis setups.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC697PWR711H |
| Brand | GE Fanuc |
| Origin | United States |
| Weight | 1.10 kg |
| Dimensions | 280 x 35 x 190 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 1.4 A @ 120 VAC, 0.7 A @ 240 VAC |
| Base Model | IC693PWR711 |
| Nominal Input Voltage | 120/240 VAC or 125 VDC |
| Input Voltage Range (AC) | 90 to 132 VAC or 180 to 264 VAC (47 to 63 Hz) |
| Input Voltage Range (DC) | 100 to 300 VDC |
| Total Output Power | 100 W total capacity |
| Output Voltage Rails | +5 VDC (up to 20 A), +12 VDC (up to 2 A), -12 VDC (up to 1 A) |
| Protection Features | Electronic short-circuit, overcurrent, and overvoltage protection |
| Ride-Through Capability | Maintains output for >= 1 input line cycle at full load |
| Status Indicators | ON/OFF power LEDs |
Backplane Bus Communication Velocity & I/O Density Scaling
The IC697PWR711H delivers stabilized voltage rails directly to the rack backplane, ensuring uninterrupted module processing and sustaining high backplane bus communication velocity during intensive PLC sweep sequences. Delivering up to 20 A on the +5 VDC bus line allows control system engineers to maximize rack expansion and integrate high-density digital and analog I/O modules without encountering logic power drops, aiding systematic I/O density scaling.
Frequently Asked Questions
Q: Can the IC697PWR711H power supply unit support two rack chassis simultaneously?
A: Yes, the module can supply power to a second expansion rack via a interconnect cable, provided the total combined power consumption across all voltage rails does not exceed 100 W.
Q: Is the IC697PWR711H power supply module hot-swappable during baseplate operation?
A: No, incoming AC/DC supply power to the terminal block must be completely isolated before inserting or removing the power supply module from the rack chassis.
Q: How does the IC697PWR711H manage orderly startup and shutdown during input power loss?
A: The module generates logic sequencing signals sent across the backplane to alert the CPU before output voltages fall below operational thresholds, enabling a clean system shutdown.
Field Installation Guidelines
- Disconnect incoming AC line power or external DC sources before seating the module into the far-left rack slot.
- Ensure the 48-pin backplane connector engages fully with the backplane receptacle before tightening top and bottom panel mounting screws.
- Connect a protective earth copper conductor from the enclosure grounding bus directly to the rack chassis ground stud.
- Verify total system load distribution across the +5 VDC, +12 VDC, and -12 VDC rails stays within the 100 W total output limit.