GE Fanuc IC755SUE10CTD QuickPanel+ 10-Inch HMI Touch Panel
Manufacturer: GE Fanuc
-
Part Number: IC755SUE10CTD
Condition：New with Original Package
Product Type: Human Machine Interfaces
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC755SUE10CTD QuickPanel+ HMI Operator Interface
Configured for human-machine interface execution and process visualization in industrial automation networks, the GE Fanuc IC755SUE10CTD (IC755SUE10CTD-AA QuickPanel+ Operator Interface Terminal) provides direct physical/electrical execution. It registers operator touch selections natively at the interface tier to transmit machine commands parallel to master control network platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC755SUE10CTD |
| Brand | GE Fanuc / General Electric (Emerson) |
| Origin | United States |
| Weight | 2.5 kg |
| Dimensions | 261.6 mm x 190.5 mm x 45.7 mm (10.3 in x 7.5 in x 1.8 in) |
| Operating Temp | -10 to +50 deg C |
| Power Consumption | 15 W |
| Display | 10-inch TFT LCD, 800 x 600 SVGA color |
| Touchscreen | Capacitive touch, glove-compatible |
| Processor | Intel Pentium-class CPU |
| Memory | 128 MB RAM, 4 GB ROM |
| Operating System | Windows CE / Windows Embedded Standard |
| Supply Voltage | 12-24 VDC |
| Communications | Ethernet 10/100 Mbps, USB 2.0, RS-232/RS-485 |
| Enclosure Rating | IP65 (Front Panel) |
Industrial Controller Architecture & Bus Network Attributes
This terminal integrates seamlessly into high-speed automation architectures, supporting determinism across Ethernet-based fieldbus backplanes and serial interfaces. System designers leverage firmware flash compatibility to deploy localized HMI applications, while managing I/O density scaling via connected PACSystems CPU architectures like the IC695CPE330. High signal isolation and network protocol handlers process Modbus, Profinet, and EtherNet/IP topologies without imposing latency on master PLC scan times.
Frequently Asked Questions
Q: How does the front panel maintain enclosure integrity when mounted in exposed industrial cabinets?
A: The panel features an IP65-rated front bezel, which provides ingress protection against airborne dust and direct water jets when correctly installed with the factory-supplied sealing gasket against a flat enclosure cutout.
Q: What power input parameters must be maintained to prevent operational instability or unexpected resets?
A: The terminal requires a regulated nominal 12-24 VDC supply drawing approximately 15 W. Wiring runs must account for voltage drops at low DC inputs to prevent supply dips below 12 VDC during high CPU processing loads.
Field Installation Guidelines
Mount the unit into a panel cutout using the provided mounting clamps to maintain a proper IP65 seal against the enclosure face. Maintain a minimum perimeter clearance of 50 mm around the rear chassis to enable adequate heat sink air dissipation. Electrically isolate the 12-24 VDC power supply wiring from high-voltage AC lines, running DC wires in separate conduits. Ground the terminal's functional earth lug directly to the central panel ground bus using a low-impedance conductor to mitigate electrical noise and surge degradation.