GE IC200ALG230H VersaMax Analog Input Modules
Manufacturer: GE Fanuc
-
Part Number: IC200ALG230H
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC200ALG230H VersaMax Analog Input Module
The GE IC200ALG230H, also cataloged as the IC200ALG230H Analog Input Module, operates as a dedicated hardware component for converting field voltage and current signals into high-resolution digital data within GE Fanuc VersaMax PLC and I/O system platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200ALG230H |
| Brand | GE / GE Fanuc |
| Origin | USA |
| Weight | 0.15 kg (0.33 lbs) |
| Dimensions | 110 x 66.8 x 50.0 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 24 VDC nominal field power |
| Input Channel Count | 4 Channels |
| Signal Input Ranges | -10 to +10 VDC / 4-20 mA |
| Resolution | 12-bit A/D conversion |
| Accuracy | +/-0.5% full scale at 25 deg C |
| Channel Update Rate | 0.4 ms per channel |
| System Isolation | 250 VAC continuous optical isolation |
| System Mounting | VersaMax I/O rack or 35 mm DIN rail |
| Diagnostics | Status LEDs for module operation and channel fault detection |
Backplane Bus & Deterministic Communications
The module routes converted 12-bit digitizing data across backplane bus communication velocity channels directly to the central processing unit. Integrated optocouplers maintain galvanic channel-to-system isolation rated at 250 VAC continuous, shielding backplane microprocessor paths against field-side voltage spikes, ground potential differentials, and electromagnetic interference.
Firmware flash compatibility across the VersaMax rack platform allows the module to sustain high-speed analog updates at 0.4 ms per channel. The backplane bus manages deterministic data transfers, passing analog image tables to controller CPU memory without incurring scan cycle latency during multi-channel sampling execution over Profinet or EtherNet/IP networks.
Frequently Asked Questions
Q: Does the IC200ALG230H support both current loop and voltage signals on the same hardware module?
A: Yes, the module accepts -10 to +10 VDC voltage inputs as well as 4-20 mA current inputs, providing dual-signal capability across its 4 analog channels.
Q: What is the channel sample conversion speed of the IC200ALG230H analog module?
A: The A/D conversion circuit operates at an update rate of 0.4 ms per channel to deliver real-time process variable data to the PLC processor.
Q: Is hot-swapping permitted for this module during active PLC system operation?
A: Modules should only be removed or installed when backplane and field power sources are de-energized to prevent logic errors or physical connector pin damage.
Field Installation Guidelines
- De-energize all main cabinet electrical feeds and verify zero voltage presence across terminal connections before beginning installation.
- Align the rear connector tracks of the IC200ALG230H module with the mounting slot of the designated VersaMax I/O carrier base.
- Push the module firmly onto the carrier interface until the top and bottom mechanical retention latches click into place.
- Terminate 4-20 mA current loop or voltage transmitter wiring using shielded twisted-pair cables connected to the carrier terminal block.
- Connect cable shields to a single grounding point on the central cabinet earth bar to prevent signal ground loop interference.
- Apply 24 VDC power, verify that the module status LED shows green, and perform channel calibration verification against known input signals.