{"product_id":"ge-ic200alg331-eb-versamax-4-channel-analog-output-module","title":"GE IC200ALG331-EB VersaMax 4 Channel Analog Output Module","description":"\u003ch2\u003eGE IC200ALG331-EB VersaMax Analog Output Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE Fanuc IC200ALG331-EB\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIC200ALG331\u003c\/strong\u003e Analog Output Module, operates as a dedicated hardware component for converting digital control words into precise analog voltage or current signals within VersaMax I\/O platforms. The module drives up to four individually isolated channels across either +-10 VDC or 4-20 mA ranges to control final control elements, variable frequency drives, and industrial actuators. Onboard digital-to-analog converters execute output updating within 7 ms while maintaining continuous isolation between channels.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200ALG331-EB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc \/ Emerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e13.8 x 2.54 x 12.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e10 mA at 5 VDC; 115 mA at 3.3 VDC backplane draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e4 individually isolated channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Output Ranges\u003c\/td\u003e\n\u003ctd\u003e+-10 VDC voltage or 4-20 mA current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e16-bit (381 uV voltage mode, 381 nA current mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Accuracy\u003c\/td\u003e\n\u003ctd\u003e+-0.1% of full scale at 25 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpdate Rate\u003c\/td\u003e\n\u003ctd\u003e7 ms maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Isolation\u003c\/td\u003e\n\u003ctd\u003e250 VAC continuous; 1500 VAC for 1 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Supply Voltage\u003c\/td\u003e\n\u003ctd\u003e18 to 30 VDC (24 VDC nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe module transfers 16-bit process values across the rack bus without degrading backplane bus communication velocity during multi-channel update cycles. Onboard memory holds channel calibration parameters and tracks diagnostics such as open wire, over\/under-range, and field power loss. Internal microprocessor registers validate firmware flash compatibility upon rack power-up, ensuring that configuration data matches the assigned channel modes before enabling physical output driver stages.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does loop isolation behave when powering current loops from the internal module supply?\u003c\/p\u003e\n\u003cp\u003eA: If technicians connect field loads to the internal 24 VDC module power supply, channel-to-channel isolation is bypassed for those specific loops. Maintaining full galvanic isolation across all 4 channels requires powering current loops through separate, external isolated loop power sources.\u003c\/p\u003e\n\u003cp\u003eQ: What diagnostic flags indicate a field-side signal line failure?\u003c\/p\u003e\n\u003cp\u003eA: The module continuously monitors circuit impedance and supply levels. An open wire fault triggers when current loop resistance exceeds threshold limits, while the onboard FLD PWR LED turns off and registers a field supply fault if the external 18-30 VDC input drops below operational limits.\u003c\/p\u003e\n\u003cp\u003eQ: Can maintenance teams replace this module under active power in hazardous areas?\u003c\/p\u003e\n\u003cp\u003eA: Technicians must completely de-energize external power supplies and rack backplane power before extracting or inserting the module in Class I, Div 2 locations. Hot-swapping in explosive atmospheres risks electrical arcing across backplane pins.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the analog module onto a compatible VersaMax carrier secured to a standard 35 mm DIN rail inside a protective cabinet. Align the module housing with the carrier slot guide rails and push firmly until the locking mechanism seats into the backplane connector. Tighten carrier mounting fasteners to prevent vibration-induced signal interruption.\u003c\/p\u003e\n\u003cp\u003eRoute 4-20 mA current loops and +-10 VDC signal lines through dedicated low-voltage wiring raceways, maintaining a minimum physical separation of 200 mm from high-voltage AC cables and switching drive wiring. Use twisted-pair shielded cable for all analog connections. Ground cable shields at a single point on the cabinet entry ground bar to suppress high-frequency noise and prevent ground loop currents from degrading signal accuracy.\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":44536430297187,"sku":"IC200ALG331-EB","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/204_797ab868-9e7f-4819-b9b7-70f59f8ebf28.jpg?v=1788147861","url":"https:\/\/www.autocontrolglobal.com\/products\/ge-ic200alg331-eb-versamax-4-channel-analog-output-module","provider":"AutoControl Global","version":"1.0","type":"link"}