GE IC200CPUE05-HK VersaMax CPU Processors Datasheet
Manufacturer: GE Fanuc
-
Part Number: IC200CPUE05-HK
Condition：New with Original Package
Product Type: CPU Processors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC200CPUE05-HK CPU Module
Configured for high-speed logic execution in distributed control networks, the GE IC200CPUE05-HK (IC200CPUE05 Compact Ethernet CPU Module) provides direct physical execution of control algorithms and signal processing tasks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200CPUE05-HK |
| Brand | GE |
| Origin | USA / Global |
| Weight | 0.5 kg |
| Dimensions | 126 x 128 x 69.1 mm |
| Operating Temp | 0 deg C to +60 deg C |
| Power Consumption | 5 VDC at 220 mA / 3.3 VDC at 570 mA |
| Max I/O Points | 2,048 points |
| Max Modules | 64 modules |
| Memory Capacity | 128 KB configurable |
| Communication Ports | RS-232, RS-485, Ethernet (RJ-45) |
PLC Control and Network Determinism
The IC200CPUE05-HK employs an integrated processor architecture to manage deterministic network traffic and local I/O logic. Firmware flash compatibility ensures the module maintains synchronization with modern control network requirements. When configuring Ethernet Global Data (EGD) exchanges, users must monitor backplane bus communication velocity to prevent latency spikes during high-density data transmission. The internal boolean execution speed is rated at 0.8 ms per 1K instructions, providing high-precision timing for time-critical automation tasks. Firmware management allows for protocol updates across SRTP and Modbus RTU stacks, ensuring consistent link integrity within multi-node industrial environments.
Frequently Asked Questions
Q: Does the CPU support field-level firmware upgrades while the process is running?
A: No. Firmware updates require the CPU to be transitioned into a STOP mode to ensure data consistency and prevent potential output instability during the flash process.
Q: How does the module handle memory retention during extended power cycles?
A: The module utilizes an onboard super capacitor for short-term retention and an external battery-backed RAM circuit that provides up to six months of data and real-time clock stability when the primary power source is removed.
Q: Are there specific termination requirements for the integrated RS-485 port?
A: Yes. In long-distance multi-drop configurations, external 120-ohm terminal resistors must be applied at both physical ends of the RS-485 segment to eliminate signal reflections.
Field Installation Guidelines
- DIN Rail Mounting: Secure the module onto the DIN rail and verify the locking tab engages fully to ensure the backplane connector is seated. Misalignment leads to intermittent backplane communication faults.
- Ethernet Connectivity: Use Category 5e or higher shielded twisted pair cabling. Maintain a minimum distance of 300 mm from high-voltage power lines to prevent Electromagnetic Interference (EMI) from impacting the 10 Mbps data link.
- Grounding: Establish a low-resistance path between the module chassis ground and the control cabinet common bus. Use a copper braided strap or conductor (min 2.5 mm square) to shunt high-frequency noise from the Ethernet and serial interface shields.
- Thermal Management: Maintain an ambient clearance of at least 50 mm above and below the module for convection cooling. Do not exceed the operating limit of 60 deg C, as excessive heat accelerates the degradation of the internal battery-backed RAM components.