GE IC200PWR002 VersaMax Power Supply Module
Manufacturer: GE Fanuc
-
Part Number: IC200PWR002A
Condition：New with Original Package
Product Type: Power Supplies
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC200PWR002 VersaMax Power Supply Module
The GE Fanuc IC200PWR002, also cataloged as the IC200PWR002 Power Supply Module, operates as a dedicated hardware component for power conditioning and regulated voltage distribution within GE Fanuc VersaMax PLC platforms. The module converts incoming 24 VDC input power into 5 VDC and 3.3 VDC backplane supply voltage to power up to 8 I/O modules, providing continuous 1500 VAC galvanic isolation between field-side input power and backplane control logic.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200PWR002 |
| Brand | GE Fanuc |
| Origin | USA / Assembled globally |
| Weight | 0.91 kg (2.00 lbs) |
| Dimensions | 3.9 cm x 4.9 cm x 13.34 cm |
| Operating Temp | -40 to 70 deg C |
| Power Consumption | 11 W max power rating |
| Input Voltage | 24 VDC |
| Input Current | 1 A max |
| Output Voltage | 5 VDC and 3.3 VDC |
| Max Output Current | 1.5 A (total across both outputs) |
| Isolation Voltage | 1500 VAC |
| Protection | Short circuit, overload, reverse polarity, over-current, over-voltage |
Firmware Flash Compatibility & Backplane Bus Communication Velocity
The IC200PWR002 power supply connects directly into the VersaMax module carrier to drive local backplane logic components without compromising communication scan rates or bus throughput. Stable internal voltage regulation across both the 5 VDC and 3.3 VDC rails maintains CPU execution timing and preserves internal register states during external DC supply transients. Full firmware flash compatibility allows this unit to interface across legacy GE Fanuc processors and current Emerson control racks without hardware modification.
Frequently Asked Questions
Q: Does the IC200PWR002 module support live hot-swapping during system operation?
A: Engineers must de-energize external 24 VDC field input power prior to unmounting or seating the IC200PWR002 on the VersaMax carrier base to prevent connector pin arcing and backplane disruption.
Q: How does the module react to output overload conditions on the backplane logic rails?
A: The IC200PWR002 features internal short-circuit and over-current protection that shuts down output voltage generation when total backplane load exceeds 1.5 A, protecting connected I/O module electronics.
Q: What power source supplies input excitation to the module terminal block?
A: The module requires an external nominal 24 VDC power supply operating within specified input tolerance limits, drawing up to 1 A during maximum output load conditions.
Field Installation Guidelines
Mount the VersaMax carrier onto a standard 35 mm DIN rail or secure it to a grounded metal enclosure backplate using screw fasteners. Align the IC200PWR002 power supply with the leftmost slot on the carrier base and press firmly until the locking mechanisms click into position. Strip incoming 24 VDC field wiring to the specified length, connect conductors to the removable terminal block, and verify polarity before applying power. Route power cables separately from high-speed data and analog signal lines to avoid electromagnetic interference. Connect the protective earth ground terminal directly to the enclosure grounding bar with a low-impedance copper lead.