GE IC200SET001-EC VersaMax Ethernet Network Adapter Module
Manufacturer: GE Fanuc
-
Part Number: IC200SET001-EC
Condition：New with Original Package
Product Type: Serial Communication Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC200SET001-EC VersaMax Ethernet Network Adapter Module
The GE Fanuc IC200SET001-EC, also cataloged as the IC200SET001 Ethernet Network Adapter Module, operates as a dedicated hardware component for protocol translation and network connectivity within VersaMax platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200SET001-EC |
| Brand | GE Fanuc |
| Origin | Refer to device label |
| Weight | 0.25 lbs (0.11 kg) |
| Dimensions | 110 mm x 66.8 mm x 50 mm |
| Operating Temp | -20 deg C to +60 deg C |
| Power Consumption | 12/24 VDC |
| Ethernet Port | One (1) 10/100 Mbps RJ45 port |
| Serial Interfaces | One (1) RS-232 and One (1) RS-485 port |
| Network Protocols | Ethernet SRTP to SNP, Modbus TCP to Modbus Slave |
| Device Capacity | Up to 16 serial devices supported |
| Mounting Type | DIN rail |
Firmware Flash Compatibility & Deterministic Networking
The module routes serial data streams across Ethernet backplane architectures by mapping Ethernet SRTP to SNP and Modbus TCP to Modbus Slave configurations. Embedded firmware flash compatibility maintains packet structure integrity during full-duplex 10/100 Mbps transmission. Internal signal isolation limits crosstalk and surge disruption across the RS-232 and RS-485 physical channels, enabling deterministic command execution across connected field devices over distances reaching up to 100 meters per network segment.
Frequently Asked Questions
Q: What power input voltage range does the IC200SET001-EC require for stable serial-to-Ethernet translation?
A: The module operates on an input voltage supply of 12 VDC or 24 VDC; feeding voltage outside this continuous DC window disrupts serial transceiver operation and halts protocol translation across the Ethernet port.
Q: How many field devices can communicate simultaneously over the integrated serial interfaces?
A: The onboard RS-485 and RS-232 communication interfaces support polling up to 16 connected serial devices when configured in Modbus TCP to Modbus Slave conversion mode.
Field Installation Guidelines
Mount the module directly onto a standard 35 mm DIN rail inside an IP54 or equivalent protective enclosure. Terminate the 10/100 Mbps Ethernet link using shielded Category 5e or Category 6 RJ45 cabling, enforcing a maximum segment length of 100 meters. Route the 12/24 VDC power wiring and serial RS-232/RS-485 communication lines through dedicated wiring conduits separate from high-voltage AC motor circuits. Ensure the ground terminal secures directly to the central enclosure earth bus to bleed high-frequency electromagnetic interference away from the internal transceivers.