GE IC695CPE330CA IC695CPE330 PACSystems RX3i CPU Controller
Manufacturer: GE Fanuc
-
Part Number: IC695CPE330CA
Condition：New with Original Package
Product Type: CPU Processors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC695CPE330CA PACSystems RX3i Controller
The GE IC695CPE330CA, also cataloged as the IC695CPE330 CPU module, operates as a dedicated hardware component for central logic processing and multi-protocol network execution within PACSystems RX3i platforms. Equipped with a 1 GHz dual-core processor and 64 MB of user memory, the module executes high-density I/O scan cycles and manages real-time fieldbus data exchanges across backplane interfaces.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695CPE330CA |
| Brand | GE |
| Origin | Standard Industrial Production |
| Weight | 1.47 kg |
| Dimensions | Standard RX3i single-slot module form factor |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Derived from RX3i backplane bus power supply |
| Base Model | IC695CPE330 |
| Processor | 1.0 GHz dual-core CPU |
| User Memory | 64 MB RAM, 64 MB NVRAM |
| Discrete I/O Capacity | 32k bits |
| Analog I/O Capacity | 32k words |
| Ethernet Ports | 3x 10/100/1000 Mbps RJ-45 (LAN 1 single, LAN 2 dual-port switched) |
| Supported Protocols | PROFINET, OPC UA, SRTP, Modbus TCP/IP, EGD, DNP3, IEC-61850 |
Backplane Bus Communication Velocity & Deterministic Networks
The IC695CPE330CA controller drives high-speed backplane bus communication velocity across the RX3i rack layout, facilitating deterministic data throughput between local I/O modules and remote expansion drops. Integrating directly into PROFINET and EtherNet/IP deterministic networks via its switched LAN ports, the unit executes frame routing with low transit latencies. Firmware flash compatibility enables online update procedures while keeping system control configurations synchronized during active operation.
Frequently Asked Questions
Q: How does the IC693/IC695 power backup function without a battery on the IC695CPE330CA?
A: The module relies on the external IC695ACC402 Energy Pack, which provides power during shutdown to write user memory contents into internal non-volatile flash storage.
Q: Can LAN 1 and LAN 2 operate on independent IP subnets simultaneously?
A: Yes, LAN 1 functions as a distinct single-port Ethernet interface, while LAN 2 operates its dual ports through an embedded internal switch, allowing physical and logical network separation across different subnets.
Field Installation Guidelines
- De-energize the RX3i baseplate power supply before seating or releasing the module from its backplane connector.
- Connect Category 6 shielded twisted-pair cables to the RJ-45 ports, ensuring run distances stay under 100 meters per line segment.
- Land cable shield braid clamps onto the enclosure copper earth bar to divert high-frequency industrial noise away from internal digital buses.
- Maintain clear vertical airflow clearance above and below the rack to permit natural thermal convection within the 0 to 60 deg C operational boundary.