GE IS200EDISG1A EX2100e/Mark VIe Exciter IO Terminal Board
Manufacturer: GE Fanuc
-
Part Number: IS200EDISG1A
Condition：New with Original Package
Product Type: Digital I/O Cards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IS200EDISG1A EX2100e/Mark VIe Series
The GE IS200EDISG1A, also cataloged as the IS200EDIS Exciter Digital Input/Output Terminal Board, operates as a dedicated hardware component for digital input/output signal termination within EX2100e and Mark VIe exciter control platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200EDISG1A |
| Brand | GE |
| Origin | United States (USA) |
| Weight | 4.00 kg (Shipping Weight) |
| Dimensions | Approx. 28 to 30 cm width |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | Driven by 28 VDC nominal backplane power |
| Channel Density | 16 digital inputs and 16 digital outputs |
| Signal Input Type | Dry contact inputs, 24 VDC logic |
| Signal Output Type | Relay / solenoid drivers (24-125 VDC) |
| Response Latency | < 1 ms for trip signals |
| Galvanic Isolation | Channel-to-system and channel-to-channel isolation |
Industrial Control and Drive Technical Attributes
The board architecture links discrete field circuits directly to the processing backbone, utilizing optimized backplane bus communication velocity parameters to process safety-critical shutdown triggers. To sustain deterministic network performance under full I/O density scaling conditions, the logic interfaces manage digital transitions through specific firmware flash compatibility matrices. This configuration eliminates latency jitters during multi-channel state changes and maintains precise sequence-of-events recording across the network.
Frequently Asked Questions
Q: Does the digital logic circuitry support online firmware flash compatibility verification while live?
A: No, firmware verification and memory flash updates must be executed during non-operational downtime periods to prevent transient corruption of the backplane bus communication velocity channels.
Q: What is the mechanical limitation for field wire termination sizes on this module?
A: The onboard terminal blocks accommodate standard industrial wiring up to 2.5 mm square (14 AWG) to ensure robust physical connectivity and minimize interface loop resistance.
Field Installation Guidelines
- Chassis Grounding Structure: Secure the assembly onto the cabinet DIN-rail or rack matrix. Ensure the main chassis ground terminal establishes a metal-to-metal low-impedance connection directly to the master protective earth busbar.
- Signal Cable Separation: Route low-voltage 24 VDC discrete input logic lines through separate physical wiring conduits isolated away from high-voltage 125 VDC solenoid output driver cables to suppress capacitive cross-talk.
- Shield Drain Termination: Land external shield drain wires exclusively at the designated grounding bracket on the terminal board frame. Do not ground both ends of the cable shield to avoid forming ground loops.