GE IS200VCRCH1BBD Mark VI Voltage Current Relay Control Board
Manufacturer: GE Fanuc
-
Part Number: DS200TCTGG1AFF 6BA0717000
Condition：New with Original Package
Product Type: Discrete I/O Boards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IS200VCRCH1BBD Mark VI Voltage Current Relay Control Board
Configured for processing voltage and current inputs in GE Mark VI turbine control systems, the GE IS200VCRCH1BBD (IS200VCRC Voltage Current Relay Control Board) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200VCRCH1BBD |
| Brand | General Electric (GE) |
| Origin | USA |
| Weight | 0.5 kg |
| Dimensions | 330 mm x 280 mm x 25 mm |
| Operating Temp | -40 to +70 deg C (Storage: -40 to +85 deg C) |
| Power Consumption | Regulated via rack backplane distribution |
| Input Voltage | 24 VDC nominal |
| I/O Configuration | Discrete sensor voltage/current inputs and relay outputs |
| Signal Mapping | Alarms, trips, and operational status channels |
| Communication Protocol | Modbus TCP/IP |
| Diagnostic Hardware | Built-in self-test, active fault detection circuitry, and channel status LEDs |
| Mounting Layout | Standard slot configuration within Mark VI turbine control racks |
Industrial Control Backplane and Deterministic Network Coupling
The IS200VCRCH1BBD channels discrete I/O vectors across the internal rack bus, coordinating high-speed data acquisition loops directly tied to turbine trip logic. The board layout enforces firmware flash compatibility to synchronize local channel processing parameters with master controller states. Running over Ethernet channels with Modbus TCP/IP support, the hardware handles instant I/O density scaling during critical system protection events, ensuring signal capture latencies remain within sub-millisecond ranges without triggering backplane communication fault conditions.
Frequently Asked Questions
Q: How do field technicians verify active channel validation and fault positioning?
A: The front panel includes dedicated diagnostic LED indicators that display real-time channel status and self-test fault detection signals.
Q: What network interface structure integrates this card into the broader control topology?
A: The hardware architecture incorporates Modbus TCP/IP protocol support, enabling data exchange with external industrial communication networks.
Q: Can the board tolerate standard industrial low-voltage fluctuations?
A: The card regulates internal processing power from a nominal 24 VDC input supply line distributed directly through the standard rack enclosure backplane.
Field Installation Guidelines
- Rack Insertion Alignment: Insert the printed circuit board along the dedicated slot guides of the Mark VI rack frame. Press the module firmly into the backplane pin sockets and torque the faceplate retention fasteners to secure structural and grounding continuity.
- Signal Line Shielding Proximity: Connect sensor voltage and current input lines through shielded twisted-pair cables. Ground the overall cable shielding at the chassis ground bus bar before termination to prevent high-frequency noise interference from adjacent power switching circuits.
- Electrostatic Discharge Management: Wear an approved grounding wrist strap during hardware installation or removal. Store the control board inside a static-shielding bag until physical deployment onto the rack backplane occurs to prevent component dielectric breakdown.