GE IS210WSVOH1ACD Mark VI WSVO Servo Driver Module 24 VDC
Manufacturer: GE Fanuc
-
Part Number: IS210WSVOH1ACD
Condition：New with Original Package
Product Type: Servo Driver Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IS210WSVOH1ACD Mark VI WSVO Servo Driver Module
The GE IS210WSVOH1ACD, also cataloged as the IS210WSVO Servo Driver Module, operates as a dedicated hardware component for closed-loop servo control and actuator positioning within Mark VI turbine control networks. The module interfaces directly with the IS200TSVCH1A terminal board and associated I/O Packs, executing physical valve positioning and utilizing Modbus TCP/IP for real-time positional feedback. Operating on a nominal 24 VDC supply, the unit integrates a dedicated heat sink to maintain thermal stability across continuous high-frequency modulation cycles.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS210WSVOH1ACD (Base Model: IS210WSVO) |
| Brand | GE (General Electric) |
| Origin | USA |
| Weight | 0.6 kg |
| Dimensions | 100 mm x 80 mm x 20 mm |
| Operating Temp | -30 deg C to +65 deg C |
| Power Consumption | 24 VDC nominal input |
| System Compatibility | Mark VI Turbine Control System |
| Execution Function | Closed-loop servo actuator control |
| Base Mounting | Mounts directly on IS200TSVCH1A terminal board |
| Communication Protocol | Modbus TCP/IP |
| Thermal Management | Integrated hardware heat sink |
I/O Density Scaling and Firmware Flash Compatibility
The IS210WSVOH1ACD supports structured I/O density scaling within the Mark VI rack architecture by consolidating servo driver logic and terminal interface connections onto a single compact footprint. This direct-mount configuration minimizes interconnect wiring while sustaining deterministic network communication over Modbus TCP/IP. Hardware execution parameters are maintained via firmware flash compatibility protocols, allowing the servo module to synchronize operating thresholds, stroke calibrations, and loop tuning constants directly from the master controller during automated system initialization phases.
Frequently Asked Questions
Q: How is the IS210WSVOH1ACD physically integrated into the Mark VI system architecture?
A: The servo driver module mounts directly onto the IS200TSVCH1A terminal board. It forms a combined assembly with the designated I/O Pack to execute closed-loop control without requiring intermediate signal conditioning relays or external converter panels.
Q: What are the thermal operating limits and cooling requirements for this servo driver module?
A: The module relies on its integrated hardware heat sink to dissipate switching thermal loads, maintaining hardware operation in ambient environments ranging from -30 deg C to +65 deg C. Enclosure layouts must preserve adequate clearance for passive convective cooling across the heat sink fins.
Field Installation Guidelines
Installation requires mating the IS210WSVOH1ACD directly to the corresponding IS200TSVCH1A terminal board. Verify the 24 VDC control power is completely isolated and discharged before aligning the multi-pin backplane connectors to prevent pin arcing. Press the module firmly into the terminal board seating until the retaining mechanisms lock, ensuring maximum surface contact for both electrical continuity and thermal dissipation.
Route field actuator wiring using twisted, shielded copper pairs. Terminate the servo feedback shields to the designated earth ground bus located on the terminal board panel, leaving the actuator-side shield electrically floating to prevent ground loops. Modbus TCP/IP communication wiring must be physically segregated from 120/240 VAC power cables and high-voltage generator leads within the cable tray to mitigate electromagnetic interference (EMI).