HE693THM809 GE Fanuc Thermocouple Input Module
Manufacturer: GE Fanuc
-
Part Number: HE693THM809
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
The GE Fanuc HE693THM809 (HE693THM809 Thermocouple Input Module) operates as an 8-channel analog acquisition interface within the Series 90-30 PLC platform. This module facilitates direct thermocouple sensor integration, eliminating the requirement for external signal conditioning hardware while providing high-resolution temperature data directly to the PLC %AI (Analog Input) register table.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | HE693THM809 |
| Brand | GE Fanuc |
| Origin | Industrial Standard Manufacturing |
| Weight | 0.45 kg |
| Dimensions | 120 mm x 40 mm x 150 mm |
| Operating Temp | 0 deg C to +60 deg C |
| Power Consumption | 300 mA at 5 VDC (from backplane) |
| Input Capacity | 8 Thermocouple Channels |
| Accuracy | +/- 1 deg C (Sensor dependent) |
Industrial Process Control and Cold Junction Compensation
The HE693THM809 utilizes integrated cold junction compensation (CJC) circuitry to maintain temperature reading accuracy across varying ambient conditions. The module performs local linearization and scaling for supported thermocouple types (J, K, T, E, R, S, B, N), reporting processed temperature values in 0.5 deg increments to the CPU. The internal logic is optimized for deterministic scan cycles, ensuring that temperature data in the %AI registers is updated reliably during the PLC process loop.
Frequently Asked Questions
Q: How should I handle an open-circuit fault indicated by the module?
A: When an open-circuit is detected, the module automatically pushes the corresponding %AI register value to its maximum limit. Logic in the PLC program should monitor for this maximum value to trigger a diagnostic alarm or fail-safe state in the control process.
Q: Is field calibration required for this module?
A: The HE693THM809 is factory-calibrated for the specified thermocouple types. Periodic verification using a precision thermocouple calibrator is recommended if the application requires strict adherence to ISO or regulatory process standards.
Q: Can this module be installed in a Series 90-30 expansion rack?
A: Yes. The module is fully compatible with standard Series 90-30 baseplates, including both local CPU racks and remote expansion racks, provided the rack backplane can support the 300 mA current draw.
Field Installation Guidelines
- Power down the PLC rack before inserting the module into an available slot to prevent backplane bus errors or short-circuiting the 5 VDC rail.
- Terminate thermocouple leads directly to the module terminals; ensure consistent polarity (positive/negative) across all channels to prevent reversed-signal inaccuracies.
- Utilize shielded, thermocouple-grade extension wire to connect sensors; ensure shields are grounded at a single point to prevent ground loops that introduce noise into the low-millivolt input signal.
- Verify the channel configuration in the Machine Edition software to match the specific thermocouple type (e.g., K-type) installed on each channel.
- Confirm stable temperature readings in the PLC I/O table; observe the module’s diagnostic LED status to ensure proper communication with the CPU backplane.