HIMA Z 7128/6217/C5/ITI Safety System Cable Plugs
Manufacturer: HIMA
-
Part Number: Z7128/6217/C5/ITI
Condition：New with Original Package
Product Type: Industrial Cable Plugs
-
Country of Origin: Germany
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
HIMA Z7128/6217/C5/ITI Industrial Cable Plug Module
The HIMA Z7128/6217/C5/ITI, also cataloged as the Z7128/6217/C5/ITI Industrial Cable Plug, operates as a dedicated hardware component for physical signal interconnection between field instruments and safety control modules within HIMA safety system platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | Z7128/6217/C5/ITI |
| Brand | HIMA |
| Origin | Germany |
| Component Type | Industrial Cable Plug |
| Connector Form Factor | Straight Plug |
| Cable Length | 5 m |
| Ingress Protection | IP67 |
| Weight | 0.16 kg |
| Dimensions | 128 mm x 165 mm x 130 mm |
| Operating Temp | -20 deg C to +60 deg C |
| Power Consumption | Passive Component |
| Safety Compliance | IEC 61508, IEC 61511 |
| Certifications | CE, FCC |
Functional Safety & Fail-Safe Interconnect Attributes
The unit enforces fail-safe state execution across critical safety-instrumented loops. Integrated high-grade insulation shields maintain signal pathway integrity against external electromagnetic interferences, preventing spurious trips or silent faults inside high-availability SIL3 safety architectures. The physical pin contact geometry minimizes transition resistance while galvanic isolation integrity is preserved across field-to-logic interface boundaries.
Frequently Asked Questions
Q: How does the plug housing maintain safety integrity in harsh electrical environments?
A: The assembly incorporates a rugged IP67-sealed outer housing with high-grade shielding that prevents moisture ingress and cross-talk interference, protecting low-level safety loop signals from noise-induced trip events.
Q: Is this cable plug hot-swappable during active controller operation?
A: Physical insertion and disconnection must adhere to local plant safety procedures and logic module guidelines to avoid open-loop fault detection or inadvertent channel trip triggers on active functional safety systems.
Field Installation Guidelines
Follow these standardized procedures during field deployment:
- Inspect the plug body, locking pins, and outer sheath for mechanical damage prior to wiring integration.
- Align the keyway mechanism of the straight connector precisely with the mating receptacle to prevent pin deflection or mechanical binding.
- Torque the outer retaining shell to hand-tight specifications until fully seated against the IP67 sealing ring.
- Route the 5 m integral cable through designated cable trays, maintaining a minimum bend radius of 10 times the outer cable diameter.
- Ground the cable shielding braid at the designated single-point system earth ground to prevent ground loops from degrading signal path isolation.