Honeywell 10100/2/1 FSC Horizontal Bus Driver Modules
Manufacturer: Honeywell
-
Part Number: 10100/2/1
Condition：New with Original Package
Product Type: Bus Driver Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Honeywell 10100/2/1 FSC Horizontal Bus Driver Module
The Honeywell 10100/2/1, also cataloged as the 10100/2/1 Horizontal Bus Driver Module, operates as a dedicated hardware component for driving and buffering horizontal bus communications within Honeywell FSC systems. The module links the central vertical bus to the horizontal I/O backplane, providing regulated 5 VDC and 24 VDC distribution while supervising fail-safe digital input paths.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 10100/2/1 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 1.5 kg |
| Dimensions | 4 TE x 3 HE (4 HP, 3U eurocard format) |
| Operating Temp | Standard industrial operating range |
| Power Consumption | 35 mA at 5 VDC (A1/A21 cable); 65 mA at 5 VDC (A22 cable) |
| Primary Function | Connects vertical bus to horizontal I/O bus with low-ripple distribution |
| Output Voltage Ripple | Less than 50 mV peak-to-peak |
| Rear Interface | DIN 41612 Type F connector with keyed indexing |
Channel-to-Channel Isolation and DCS Network Connectivity
The bus driver module maintains signal integrity across the horizontal backplane by isolating central logic processing circuits from field bus loading disturbances. Integrated regulation circuitry limits backplane voltage ripple to under 50 mV peak-to-peak, ensuring stable data frame transmission and preventing noise interference across adjacent I/O slots. Furthermore, the unit supports both non-redundant (A1 cable) and redundant rack interconnections (A21/A22 cables) to preserve deterministic communication links across single and dual I/O rack configurations.
Frequently Asked Questions
Q: How does the cable configuration affect the module current consumption?
A: Current draw on the 5 VDC rail is 35 mA when paired with A1 or A21 cables, and increases to 65 mA when utilizing the A22 cable configuration.
Q: What physical connector standard is used on the backplane interface?
A: The module connects to the FSC rack backplane via a rear-mounted DIN 41612 Type F keyed connector.
Q: How are single and dual rack setups distinguished in wiring configuration?
A: Non-redundant setups utilize the A1 cable, whereas redundant setups utilize the A21 cable for a single I/O rack or the A22 cable to extend coverage across two I/O racks.
Field Installation Guidelines
Align the 10100/2/1 module guide rails with the designated 4 TE wide slot in the FSC chassis. Slide the card firmly into the rack until the rear DIN 41612 Type F connector seats securely into the backplane matrix. Fasten the front panel retaining screws to ensure stable chassis grounding and mechanical retention. Verify cable selection (A1, A21, or A22) based on system redundancy requirements before applying power to the rack.