Honeywell CC-PDOB01 Experion PKS Digital Output Module
Manufacturer: Honeywell
-
Part Number: CC-PDOBO1
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Honeywell CC-PDOB01 Experion Series C Digital Output Module
The Honeywell CC-PDOB01, also cataloged as the CC-PDOB01 Digital Output Module, operates as a dedicated hardware component for 32-channel sourcing discrete output execution within Honeywell Experion PKS Series C distributed control systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CC-PDOB01 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 1.1 kg |
| Dimensions | 144 mm x 137 mm x 175 mm |
| Operating Temp | -20 to 60 deg C |
| Power Consumption | 24 VDC nominal supply (6 A max module current) |
| System Platform | Honeywell Experion PKS Series C |
| Number of Output Channels | 32 sourcing outputs |
| Max Current per Channel | 0.5 A |
| Max Current per Group | 4 A per group of 8 channels |
| Galvanic Isolation | 1500 VAC RMS or plus/minus 1500 VDC |
| Short-Circuit Protection | Electronic, fuse-less protection |
| Compatible Terminations | CC-TDOB01 or redundant CC-TDOB11 |
| Mounting Type | DIN rail or panel mount |
4-20 mA HART Loop Protocol & Channel Isolation
Engineers integrate the module into distributed control networks requiring rigorous signal separation and process reliability. The architecture employs 1500 VAC RMS galvanic channel-to-channel isolation to suppress common-mode voltage interference and eliminate ground loops across field circuits. Built-in electronic short-circuit protection and cold junction compensation features ensure stable execution when driving inductive loads like solenoid valves and interposing relays. Internal diagnostic routines continuously monitor group current draws up to 4 A, reporting fault states directly to the Experion controller bus.
Frequently Asked Questions
Q: Does the module support hot-swap replacement under power?
A: Yes, the module architecture supports hot-swapping within Series C chassis slots without disrupting backplane communications or healthy loop power.
Q: How does the module handle short-circuit protection on output lines?
A: Electronic fuse-less protection monitors each channel to limit fault currents automatically without requiring physical fuse replacements after a short-circuit event.
Field Installation Guidelines
Mount the module on standard DIN EN rail or secure panel mounts inside a clean, grounded industrial cabinet. Maintain a vertical clearance of 50 mm above and below the chassis to allow unimpeded thermal convection up to the 60 deg C maximum operating limit. Connect field wiring through compatible CC-TDOB01 or redundant CC-TDOB11 termination assemblies, torquing terminal screws securely. Ground all cable shields directly to the cabinet ground bar using a low-impedance copper braid to eliminate electromagnetic interference.