Honeywell FC-PSU-240516 Safety Manager Power Supply Module
Manufacturer: Honeywell
-
Part Number: FC-PSU-240516
Condition：New with Original Package
Product Type: Power Supply Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Honeywell FC-PSU-240516 Power Supply Module
Configured for power distribution execution in Safety Manager platforms, the Honeywell FC-PSU-240516 (FS-PSU-240516 Power Supply Module) provides direct physical/electrical execution across safety system backplane networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | FC-PSU-240516 (FS-PSU-240516) |
| Brand | Honeywell |
| Origin | Standard Industrial Manufacturing |
| Weight | 0.85 kg |
| Dimensions | 21.1 cm x 3.52 cm x 17.6 cm |
| Operating Temp | -5 deg C to +70 deg C |
| Power Consumption | Power Supply Output Component |
| Coating Type | Non-Conformal Coated |
| Humidity | 10% to 95% RH (Non-Condensing) |
4-20 mA HART Loop Protocol and Channel-to-Channel Isolation
The power supply module maintains regulated DC voltage rails across backplane buses while providing galvanic isolation between primary field power feeds and sensitive internal processing logic. Integrated diagnostic loops continuously monitor supply rail stability and output load conditions to prevent voltage sag across process control field instruments. Furthermore, channel-to-channel isolation safeguards interconnected I/O nodes against common-mode electrical noise and high-voltage line surges.
Frequently Asked Questions
Q: What are the physical dimensions and weight metrics for the FC-PSU-240516 module?
A: The module measures 21.1 cm x 3.52 cm x 17.6 cm and weighs 0.85 kg.
Q: What environmental temperature range does the module accommodate during active operation?
A: The unit operates reliably within an operating temperature range of -5 deg C to +70 deg C.
Q: Is the FC-PSU-240516 module conformally coated?
A: No, the FS-PSU-240516 designation specifies a non-conformal coated hardware configuration.
Field Installation Guidelines
Mount the power supply module securely into the designated backplane rack slot, ensuring solid engagement of rear connector pins. Ground the chassis using low-impedance grounding straps connected directly to the primary cabinet earth bar. Verify incoming line power levels and terminal screw torques before applying power to the rack. Maintain adequate ventilation clearance above and below the module enclosure to facilitate natural thermal convection.