Honeywell FC-TDOL-0724P Safety Manager Output Assembly
Manufacturer: Honeywell
-
Part Number: FC-TDOL-0724P V1.0
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Honeywell FC-TDOL-0724 P V1.0 Digital Output FTA
The Honeywell FC-TDOL-0724 P V1.0, also cataloged as the FC-TDOL-0724P Line-Monitored Digital Output Field Termination Assembly (FTA), operates as a dedicated hardware component for relay contact switching and field wiring supervision within Honeywell Safety Manager systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | FC-TDOL-0724 P V1.0 / FC-TDOL-0724P |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.62 kg |
| Dimensions | 24 cm x 10.8 cm x 8.5 cm |
| Operating Temp | -20 to 70 deg C |
| Power Consumption | 24 VDC nominal supply (18 to 31.2 VDC tolerance) |
| System Platform | Honeywell Safety Manager |
| Number of Channels | 7 channels |
| Output Protection | 2 A slow-acting fuse per channel (5 x 20 mm) |
| Max Field Load | 50 W per channel (Resistive and inductive) |
| Line Monitoring | Open-circuit and short-circuit fault detection |
| System Compatibility | SDO-0824 Output Module / SDI-1624 Input Module |
| Mounting | Standard DIN EN rail |
| Construction | Conformal-coated circuit board assembly |
Process Control Loop Integrity & Galvanic Signal Isolation
Engineers integrate the assembly into Safety Manager networks requiring high integrity field loop execution. High-density circuitry utilizes galvanic channel isolation to block common-mode voltage surges and suppress field crosstalk across adjacent channels. Built-in line monitoring continuously verifies field circuit integrity, detecting open-circuit wiring and short-circuit faults whether channels sit energized or de-energized. Internal diagnostic pathways report fault conditions directly back to the Safety Manager I/O interface without interrupting system loop power execution.
Frequently Asked Questions
Q: How does line monitoring operate when the output contact is de-energized?
A: The board applies a low-level diagnostic current across the field loop, measuring circuit impedance to detect open circuits or shorted wiring without tripping downstream field devices.
Q: What fuse rating protects individual output channels?
A: Each channel contains a dedicated 2 A slow-acting fuse measuring 5 x 20 mm to protect output switching relays against overcurrent conditions caused by field short circuits.
Field Installation Guidelines
Mount the module on standard DIN EN rail inside clean, enclosure-protected industrial environments. Maintain a minimum 50 mm clearance above and below the module to allow adequate thermal convection across conformal-coated components. Connect incoming system power cables to the 2-pole main power terminal, ensuring proper line polarity. Wire field devices directly to the seven-pair screw terminals, torquing screw connectors to 0.5 Nm. Ground all field cable shields at the enclosure entry point via a single earth bus to eliminate ground loop currents.