Honeywell FS-SICC-0001/L30 SICC FTA Interconnection Cable
Manufacturer: HONEYWELL
-
Part Number: FS-SICC-0001/L30
Condition：New with Original Package
Product Type: Interconnection Cables
-
Country of Origin: Sweden
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Honeywell FS-SICC-0001/L30 SICC Series Interconnection Cable
The Honeywell FS-SICC-0001/L30, also cataloged as the FS-SICC-0001 FTA Interconnection Cable, operates as a dedicated hardware component for physical signal interconnection between FSC controllers and field terminal assemblies (FTAs) within Honeywell FSC systems. The pre-fabricated cable structure maintains dedicated physical signal lines to transmit multi-channel safety-rated control signals and communication traffic across industrial enclosures.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | FS-SICC-0001/L30 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 3.0 kg |
| Dimensions | 3 meters (Length) |
| Operating Temp | Standard industrial safety cabinet ambient range |
| Power Consumption | Passive component (Zero operational load) |
| Cable Type | FTA Interconnection Cable |
| Termination Interfaces | Factory-terminated specific connector assemblies |
| Shielding Structure | Built-in high-grade EMI/RFI protective shield |
| Signal Classification | Safety-rated control and communication signals |
4-20 mA HART Loop Protocol and DCS Synchronization
The multi-conductor interconnecting cable assembly maintains distinct analog and discrete transmission paths across the primary marshalling architecture. By utilizing an integrated high-density shielding braid, the cable achieves strict channel-to-channel isolation parameters between adjacent internal conductors, preventing high-frequency noise from corrupting standard 4-20 mA HART loop protocol signals. This electro-magnetic barrier reduces cross-talk, keeping common-mode voltages below levels that could impact the cold junction compensation (CJC) circuits of remote temperature instruments connected to the same distributed control system (DCS) backplane.
Frequently Asked Questions
Q: Does this hardware assembly support on-site field modifications or length trimming?
A: No, the cable assembly features factory-molded, pre-tested termination connectors on both ends. You must not cut, splice, or alter the cable length in the field, as this degrades the impedance matching and invalidates the safety-rated signal certification.
Q: How does the internal shielding handle high-frequency electromagnetic noise?
A: The cable utilizes a continuous high-grade EMI/RFI protection shield that encloses the internal conductor bundle, providing a low-impedance path to drain induced noise voltages away from the active communication wires.
Field Installation Guidelines
Lay the cable carefully inside the cabinet wire ducts, maintaining a bend radius that complies with standard industrial installation codes to avoid stressing the internal copper conductors. Align the factory-terminated connectors with the corresponding mating sockets on the FSC controller and the Field Terminal Assembly, pushing straight in until the locking mechanisms seat fully. You must separate this low-voltage signal cable from AC power lines or variable-frequency drive leads to minimize the risk of inductive interference. Connect the built-in shield drain wire to the dedicated instrument ground bus bar inside the enclosure, ensuring a clean ground connection to maintain the safety system's noise immunity.
Format 1: FS-SICC-0001/L30 Honeywell Interconnection Cable | New & Original Stock
Format 2: FS-SICC-0001/L30 Honeywell SICC Series Datasheet & Technical Manual
Honeywell FS-SICC-0001/L30 SICC FTA Interconnection Cable
Meta Description: Purchase the Honeywell FS-SICC-0001/L30 SICC Cable. Brand New, Original Stock, Global Shipping. Factory-terminated 3-meter safety interconnection cable.