IC200EBI001 GE Fanuc VersaMax Ethernet Interface Unit
Manufacturer: GE Fanuc
-
Part Number: IC200EBI001-DF
Condition：New with Original Package
Product Type: Ethernet Network Interface Units
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC200EBI001 Ethernet Network Interface Unit
Configured for high-speed Ethernet communication and remote I/O processing in GE Fanuc VersaMax control systems, the GE IC200EBI001, cataloged with the specific variant IC200EBI001-DF Ethernet Network Interface Unit, provides direct physical and electrical execution of slave data interchange between central controllers and local drop racks.
Suffix Breakdown & Model Matrix
The IC200EBI001 designator defines the core Ethernet Network Interface Unit platform within the VersaMax I/O family. Revision suffixes denote internal hardware updates, component revisions, or firmware flash baseline updates:
- IC200EBI001: Base catalog number representing the Ethernet Network Interface Unit hardware interface for VersaMax backplane systems.
- IC200EBI001-DF: Revision-specific hardware release featuring updated board layouts, optimized backplane driver components, and flash firmware compatibility enhancements.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200EBI001 (Variant: IC200EBI001-DF) |
| Brand | GE Fanuc / Emerson |
| Origin | USA / Various |
| Weight | 0.14 kg (0.31 lbs) |
| Dimensions | 133.4 x 69.1 x 85.9 mm |
| Operating Temp | 0 to 40 deg C |
| Storage Temp | 0 to 50 deg C |
| Power Consumption | ~0.5 W (via 5 VDC backplane supply) |
| Network Interface | 1 x RJ45 Port (10/100 Mbps, auto-negotiation) |
| Maximum I/O Capacity | 1024 bytes (512 bytes discrete inputs / 512 bytes discrete outputs) |
| Expansion Capacity | Up to 64 I/O modules across 7 expansion racks |
| Status LED Array | 5 LEDs: PWR, OK, FAULTS, LAN, STAT |
| Isolation Voltage | 1500 VAC / VDC between field logic side and system backplane |
| Mounting Options | Standard 35 x 7.5 mm DIN rail or panel mounting |
| Maximum Operating Altitude | 1000 m above sea level |
| Operating Humidity | 80% maximum, non-condensing |
Backplane Bus Communication Velocity & Network Integrity
The GE IC200EBI001 interface unit balances real-time Ethernet layer routing with high-speed local backplane bus communication velocity. Upon receiving incoming deterministic packets via its 10/100 Mbps RJ45 interface, the unit internal ASIC translates protocol commands directly into raw backplane frame sequences. This design minimizes transmission latency across attached VersaMax I/O modules while facilitating backplane power distribution. Furthermore, internal firmware flash compatibility ensures synchronized cyclic data updates between the main controller memory map and up to 64 connected expansion modules without backplane bottlenecking or frame drops.
Frequently Asked Questions
Q: How does the IC200EBI001 handle module autoconfiguration on the VersaMax local rack?
A: The IC200EBI001 supports active autoconfiguration routines. Upon backplane power application, the unit scans installed local and expansion rack modules, maps physical slot addresses directly to internal memory offset tables, and verifies I/O module integrity prior to establishing active Ethernet host communication.
Q: What precautions apply to hot-swapping or removing modules attached behind the interface unit?
A: While the network interface unit supports high-reliability data execution, field technicians must isolate field-side relay voltages and turn off local rack power prior to physically unseating or inserting expansion rack connections to prevent transient arc disruptions along the logic backplane bus lines.
Q: How are internal fault diagnostics communicated through the front panel?
A: The unit features five distinct LEDs (PWR, OK, FAULTS, LAN, STAT). Hardware or backplane communication disruptions trip internal bit registers, generating visual error codes on the FAULTS LED while simultaneously allocating up to 128 bytes of diagnostic fault data into the dedicated network status memory register block.
Field Installation Guidelines
- Ensure the 35 x 7.5 mm DIN-rail mounting surface is cleanly connected to protective earth (PE) with a low-impedance connection before clipping the module base into place.
- Maintain proper wiring segregation by routing 10/100 Mbps Ethernet twisted-pair cabling through dedicated low-voltage trunk conduits, physically separated from high-voltage motor control or inductive coil lines.
- Observe strict shield grounding protocols by terminating Ethernet STP cable shielding directly at the network switch frame or grounding clamp assembly to avoid ground loop noise along the 1500 V isolated logic interface.
- Maintain at least 25 mm of clear ventilation space around the top and bottom edges of the unit chassis to facilitate natural convection cooling under continuous operating loads.
- When extending backplane connections to secondary expansion racks, utilize approved factory cables and observe physical length constraints to prevent signal attenuation along high-speed backplane driver traces.