IC200MDL741E GE Fanuc VersaMax Discrete Output Modules
Manufacturer: GE Fanuc
-
Part Number: IC200MDL741E
Condition：New with Original Package
Product Type: Discrete Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC200MDL741E VersaMax Discrete Output Module
The GE Fanuc IC200MDL741E, also cataloged as the IC200MDL741E Discrete Output Module, operates as a dedicated hardware component for digital ON/OFF control signal execution within GE Fanuc VersaMax PLC and I/O system platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200MDL741E |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.35 kg |
| Dimensions | 109 x 64 x 58 mm (4.3 x 2.5 x 2.3 in) |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 24 VDC nominal field power |
| Output Channels | 32 discrete output channels |
| Output Type | Positive logic / Sinking outputs (24 VDC) |
| Output Voltage Range | 10 to 30 VDC |
| Output Current per Channel | 0.3 A max |
| Total Module Current | 9.6 A max |
| Isolation | Galvanic channel-to-channel and channel-to-system isolation |
| Carrier Compatibility | IC200CHS022C carrier base |
| System Mounting | VersaMax I/O rack or standard 35 mm DIN rail |
| Diagnostics | Status LEDs for individual channel execution and fault detection |
Backplane Bus & Deterministic Networks
The module interfaces with the VersaMax rack backplane bus through the IC200CHS022C carrier base to receive real-time output image tables from the CPU module. The internal bus architecture drives high channel density I/O scaling across all 32 solid-state output points without compromising cycle update speeds. Firmware flash compatibility within the system controller guarantees seamless integration across standard backplane revisions.
Galvanic isolation circuitry shields the internal logic processing components from field-side voltage spikes and noise interference. By isolating backplane bus communication velocity pathways from field wiring loops, the hardware ensures deterministic control response times across Profinet and EtherNet/IP networks linked to the central processing unit.
Frequently Asked Questions
Q: What is the maximum load current capacity allowed per channel on the IC200MDL741E?
A: Each individual output channel supports a maximum current rating of 0.3 A at 24 VDC, with the total cumulative module current capped at 9.6 A.
Q: Can the IC200MDL741E discrete output module drive AC field loads directly?
A: No, the output channels are rated strictly for 24 VDC (10 to 30 VDC operating range) DC loads and cannot directly switch AC circuits.
Q: Does removing the module from its carrier interrupt field wiring continuity?
A: Installing or removing the IC200MDL741E module from its IC200CHS022C carrier base leaves terminal block field wiring intact, allowing modular servicing without disturbing cabinet cabling.
Field Installation Guidelines
- Disconnect all main cabinet power sources and verify that no external field voltages remain active prior to mounting the hardware.
- Snap the IC200CHS022C carrier base securely onto a standard 35 mm DIN rail or fasten it directly to the enclosure backplate using mounting screws.
- Align the IC200MDL741E module edge connectors with the receiving socket on the carrier base and push downward until the locking latches click into place.
- Wire the 24 VDC field devices to the carrier terminal block terminals, ensuring total load current on any single channel does not exceed 0.3 A.
- Separate 24 VDC discrete output wiring from high-voltage AC lines and inductive motor cables inside cable trunking to prevent noise coupling.
- Reapply system operating power, verify that the carrier and module power LEDs light up green, and conduct point-to-point output force testing.