IC200UEI016 GE Fanuc VersaMax Micro Discrete Input Module
Manufacturer: GE Fanuc
-
Part Number: IC200UEI016
Condition：New with Original Package
Product Type: Digital Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC200UEI016 VersaMax Micro Discrete Input Expansion Module
Configured for discrete digital signal acquisition in VersaMax Micro automation platforms, the GE IC200UEI016 (IC200UEI016-A Discrete Expansion Module) provides direct physical/electrical execution. The unit accepts 24 VDC positive logic signals from field devices such as limit switches, pushbuttons, and proximity sensors, translating electrical state changes across 16 channels into digital data for the local controller.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200UEI016 |
| Brand | GE Fanuc / Emerson |
| Origin | USA |
| Weight | 0.91 kg (2.00 lbs) |
| Dimensions | 150 mm W x 76 mm D x 90 mm H |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 4 W |
| Input Points | 16 discrete DC inputs |
| Input Voltage Range | 0 to 30 VDC (24 VDC nominal) |
| Input Logic Type | Positive logic (ON >= 15 VDC, OFF <= 5 VDC) |
| Input Current | 7 mA per point at 24 VDC |
| Input Response Time | 1 ms typical |
| Isolation | 1500 V RMS field-to-logic, 500 V RMS between groups |
| Status Indicators | 16 channel LEDs, 1 module OK LED |
| Sensor Power Output | 200 mA at 24 VDC |
| Expansion Limit | Maximum 4 expansion modules per Micro PLC base unit |
Backplane Bus Communication and Network Architecture
The IC200UEI016 interfacing circuit interfaces directly with the VersaMax Micro backplane bus to ensure backplane bus communication velocity stays synchronized with central CPU scan cycles. Firmware flash compatibility within the main controller manages channel mapping without extra programming steps. The unit scales I/O density by accommodating up to 4 expansion modules per base controller, sustaining 1 ms signal processing speed while maintaining channel isolation integrity across the local expansion rail.
Frequently Asked Questions
Q: How does the module handle signal isolation between field wiring and logic circuits?
A: Optical isolation circuitry limits transient voltage transfers by providing 1500 V RMS field-to-logic isolation and 500 V RMS isolation between internal channel groups.
Q: What are the electrical threshold limits for switching a channel between ON and OFF states?
A: An input point registers an ON state at or above 15 VDC and transitions to an OFF state at or below 5 VDC, drawing approximately 7 mA per channel at nominal 24 VDC.
Field Installation Guidelines
Mount the unit on standard 35 mm DIN rail or attach directly to a mounting panel with screws. Secure the expansion bus cable to the base controller before applying power. Route field input wiring away from high-voltage AC lines to minimize noise induction, ensuring external 24 VDC power connects with correct polarity to support the positive logic configuration. Ground the panel assembly to a low-impedance copper busbar, and verify total current draw does not exceed the 200 mA limit when utilizing onboard sensor power.