IC200UEX626 GE VersaMax Micro 6 Point Analog Expansion Unit
Manufacturer: GE Fanuc
-
Part Number: IC200UEX626
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC200UEX626 VersaMax Micro Analog Expansion Unit
The GE IC200UEX626, also cataloged as the IC200UEX626-B 6 Point Analog Expansion Unit, operates as a dedicated hardware component for analog signal conditioning and field device interfacing within VersaMax Micro PLC networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200UEX626 |
| Brand | GE Fanuc / Emerson |
| Origin | USA |
| Weight | 0.45 kg (1.00 lbs) |
| Dimensions | 102 mm W x 114 mm D x 51 mm H |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 24 VDC (Operating range 19.2 to 30 VDC) |
| System Platform | VersaMax Micro |
| Expansion Capacity | 6 I/O points (4 analog inputs / 2 analog outputs) |
| Signal Range Options | 4-20 mA current loop, 0-10 V voltage |
| Resolution | 12 to 13 bit A/D and D/A conversion |
| Sampling Cycle | Less than 10 ms full-channel refresh |
| Channel Isolation | Independent isolation per channel |
| Storage Temp | -40 to 85 deg C |
| Operating Humidity | 5% to 95% (non-condensing) |
| Remote Distance Limit | Can be installed up to 2 m away from Micro PLC |
| Mounting | Standard 35 mm DIN rail |
Backplane Bus Communication and Network Architecture
The IC200UEX626 module coordinates backplane bus communication velocity directly across the local expansion bus, processing analog signals within a less than 10 ms full-channel refresh cycle. Integrated conversion logic delivers 12-to-13 bit resolution while maintaining firmware flash compatibility across connected controller hardware. High channel-to-channel isolation prevents ground loop interference across mixed-signal topologies, maintaining structured I/O density scaling options up to the expansion distance limit of 2 m from the main controller.
Frequently Asked Questions
Q: How far can the IC200UEX626 expansion unit be placed from the base VersaMax Micro controller?
A: The module supports local expansion bus extension cables allowing mounting locations up to 2 m away from the main controller base unit.
Q: What resolution and signal standards are supported on the analog channels?
A: The 4 analog input and 2 analog output channels process standard 4-20 mA current loops and 0-10 V voltage ranges with 12-to-13 bit conversion resolution.
Field Installation Guidelines
Snap the module onto a standard 35 mm DIN rail in an upright orientation within the control cabinet. Secure the expansion bus interface cable between the module and the primary VersaMax Micro base unit, keeping the total cable run within 2 m. Route analog signal cables separately from high-voltage AC conductors using twisted-pair shielded wire. Earth the cable shields at a single point on the main panel ground bar to maintain signal resolution and isolate channels from high-frequency electromagnetic field interference.