IC693BEM340-CE GE Fanuc Series 90-30 FIP Bus Controller
Manufacturer: GE Fanuc
-
Part Number: IC693BEM340
Condition：New with Original Package
Product Type: Communication Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693BEM340-CE Series 90-30 FIP Bus Controller Module
The GE Fanuc IC693BEM340-CE, also cataloged as the IC693BEM340 FIP Bus Controller Module, operates as a dedicated hardware component for deterministic remote I/O data processing and serial field communication within Series 90-30 PLC backplanes.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693BEM340-CE |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.272 kg (272 g) |
| Dimensions | Single-slot Series 90-30 rack module |
| Operating Temp | -20 deg C to +70 deg C |
| Storage Temp | -40 deg C to +85 deg C |
| Operating Voltage | 115 VAC nominal (93-132 VAC operating range, 47-63 Hz) |
| Power Consumption | 0.4 A at +5 VDC (2 W) |
| Protocol | FIP Bus Protocol |
| System Compatibility | GE Series 90-30, Series 90-70, Field Control Stations |
| Humidity | 5-95% non-condensing |
Backplane Bus Communication Velocity and I/O Density Scaling
The module handles multi-node field network coordination by interfacing directly across the Series 90-30 rack backplane bus. Firmware flash compatibility allows integration with Series 90-70 processors and Field Control I/O networks via Bus Interface Units (BIUs) or Remote I/O Scanners. By offloading cyclical I/O management, local diagnostic evaluation, and configuration memory storage from the primary CPU, the controller maintains fixed scan latency across distributed node topologies. Internal registers manage deterministic data polling schedules, maintaining stable channel exchange without taxing main processor memory allocations.
Frequently Asked Questions
Q: Does the IC693BEM340-CE require standalone external programming tools for network setup?
A: No. Module initialization, memory allocation, and parameter assignments execute directly through the host PLC programming software environment.
Q: How does the IC693BEM340-CE interface with mixed-generation GE control hardware?
A: The controller transmits FIP protocol frames over standard serial bus cabling, interfacing with Series 90-70 racks and Field Control drop units via dedicated Bus Interface Units.
Q: Can the IC693BEM340-CE be hot-swapped into an energized Series 90-30 rack slot?
A: No. System power to the baseplate rack must be disconnected before removing or inserting the module to prevent electrical damage to backplane pin connections.
Field Installation Guidelines
Turn off main rack power before installing the module into the Series 90-30 baseplate slot. Align the rear card edge connector with the target backplane receptacle and press the module firmly until the retention mechanism fully engages.
Route FIP serial communication wiring away from high-voltage AC lines and variable frequency drive outputs, maintaining a minimum clearance of 200 mm. Ground all cable shields at a single earth termination point to avoid ground loops. Ensure unobstructed vertical airflow around the baseplate assembly to keep ambient operating temperatures within the -20 deg C to +70 deg C range.