IC693CBL301 GE Fanuc Series 90-30 PLC Interconnect Cable
Manufacturer: GE Fanuc
-
Part Number: IC693CBL301
Condition：New with Original Package
Product Type: PLC Cables
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693CBL301 Series 90-30 PLC I/O Cable
The GE Fanuc IC693CBL301, also cataloged as the IC693CBL301 PLC I/O Cable, operates as a dedicated hardware component for high-integrity signal transmission between I/O modules and external control devices within Series 90-30 PLC platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693CBL301 |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.25 kg (0.55 lbs) |
| Dimensions | 0.91 m (3 ft) Cable Length |
| Operating Temp | -20 deg C to +60 deg C |
| Power Consumption | Passive Conductive Cable Assembly |
| Connector Type | 15-pin D-sub connectors (Male / Female) |
| Cable Construction | Shielded twisted-pair conductors with flexible PVC jacket |
| System Compatibility | Series 90-30 I/O modules, including IC693MDL series |
| Noise Immunity | Overall braid and foil shield for high EMI/RFI suppression |
Backplane Bus Communication & I/O Density Scaling
The interconnect cable transfers discrete and analog field signals directly to the main rack interface without compromising backplane bus communication velocity across expanded chassis layouts. High-density pin configurations maintain structural integrity during continuous scan cycles, providing tight alignment with I/O density scaling requirements in complex control panels. Continuous copper shielding prevents electromagnetic noise from degrading high-speed serial communications, maintaining firmware flash compatibility and status register integrity across connected Series 90-30 processor networks.
Frequently Asked Questions
Q: How does the internal shielding structure mitigate high-frequency electrical noise in dense control panels?
A: The cable incorporates an overall braid and foil shield surrounding internal conductors, grounding electromagnetic interference (EMI) directly to the chassis ground through metal 15-pin D-sub connector shells.
Q: Can the IC693CBL301 handle hot-swapping or live disconnects during active CPU execution?
A: While the cable itself contains passive copper contacts, technicians should refrain from disconnecting I/O signal lines under active load to prevent unexpected CPU fault trips or output field state changes.
Field Installation Guidelines
Inspect the 15-pin D-sub connector pins for mechanical alignment before mating the cable to any Series 90-30 module port. Align the connector housing flush against the module interface, then hand-tighten the dual thumbscrews securely to ensure a continuous ground bond and prevent loose contacts under panel vibration. Route the cable through dedicated low-voltage wiring troughs, keeping a minimum clearance from three-phase AC power lines or variable frequency drive cables to eliminate inductive coupling, and avoid exceeding the minimum cable bend radius during tight enclosure installation.