IC693DSM302-AE GE Fanuc Series 90-30 Motion Control Module
Manufacturer: GE Fanuc
-
Part Number: IC693DSM302-AE
Condition：New with Original Package
Product Type: Motion Control Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693DSM302-AE Series 90-30 Motion Control Module
The GE Fanuc IC693DSM302-AE serves as the primary IC693DSM302 Motion Control Module utilized to execute high-precision multi-axis servo loops across GE Fanuc Series 90-30 PLC platforms. Configured for high-performance motion program tracking, the module interfaces directly with servo systems to coordinate velocity and positioning commands based on real-time backplane variables.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693DSM302-AE |
| Brand | GE Fanuc |
| Origin | Japan |
| Weight | 0.88 lbs (0.40 kg) |
| Dimensions | Standard 90-30 module slot size |
| Operating Temp | 0 to +60 deg C |
| Power Consumption | 450 mA at 5 VDC (typical backplane current draw) |
| Controlled Axes | Up to 2 digital servos (alpha/beta Series) or 4 analog servos |
| Loop Update Rates | Torque: 250 us, Velocity: 1 ms, Position: 2 ms |
| Block Processing Time | Less than 5 ms |
| Programming Capacity | 10 programs and 40 subroutines (non-volatile) |
| Communication Interface | RS-232 serial COMM port |
| I/O Structure | Quadrature encoder inputs, home/overtravel inputs, analog/digital outputs |
| CPU Compatibility | Series 90-30 CPUs with firmware v10.0 or higher |
Industrial Control & Backplane Architecture
The plug-in module architecture interfaces through the proprietary rack infrastructure to achieve high backplane bus communication velocity Licences and maintain verified firmware flash compatibility across standard Series 90-30 sub-racks. Embedded DSP hardware drives specialized vector loops for digital and analog motor tracking, maintaining localized control cycle times without penalizing the main logic processor scan time. Field-side connections receive encoder signal lines and overtravel switches directly into the I/O density scaling layer, utilizing isolation barriers to isolate high-frequency switching noise from adjacent system logic slots.
Frequently Asked Questions
Q: What are the backplane firmware requirements for the primary CPU when installing this module?
A: The GE Fanuc Series 90-30 CPU must operate with firmware version 10.0 or higher to recognize the multi-axis motion control configuration and execute synchronous commands.
Q: Can this module support electronic CAM profiles natively?
A: No, the IC693DSM302 hardware does not support electronic CAM logic; execution of CAM profiling requires upgrading the system to the DSM314 hardware variation.
Q: How is the motion control program data preserved during a total power disruption?
A: The card incorporates non-volatile flash storage memory to lock up to 10 distinct motion programs and 40 subroutines, eliminating the need for external battery backup systems for motion code retention.
Field Installation Guidelines
- Ensure the base PLC rack power supply is completely switched off before sliding the module into its designated slot.
- Secure all quadrature encoder and auxiliary switch shield wires to the grounding bar at the base of the enclosure to prevent electromagnetic noise spikes.
- Configure target scaling units inside the VersaPro development environment (v1.1 or later) to match the exact physical travel metrics of the physical actuators.
- Keep the RS-232 communication cable disconnected during active process cycles, using it only for point-to-point programming or firmware updates.