IC693MDL753 GE Fanuc Series 90-30 Digital Output Modules
Manufacturer: GE Fanuc
-
Part Number: IC693MDL753-K
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693MDL753 Series 90-30 Output Module
The GE Fanuc IC693MDL753-K, also cataloged as the IC693MDL753 discrete output module, operates as a dedicated hardware component for driving 12/24 VDC field loads within Series 90-30 PLC platforms. It manages positive logic sourcing signals for up to 32 discrete output points across four isolated groups.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693MDL753-K |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.5 kg (1.1 lbs) |
| Dimensions | 101.6 x 127 x 27.94 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 260 mA maximum at 5 VDC backplane |
| Output Points | 32 (4 isolated groups of 8 channels) |
| Voltage Range | 10.2 to 28.8 VDC (12/24 VDC nominal) |
| Output Current | 0.5 A per point, 4 A max per module |
| Inrush Current | 5.4 A maximum for 10 ms |
| Isolation | 1500 VAC field-to-logic, 250 VAC group-to-group |
| On-State Drop | 0.3 VDC maximum |
| Switching Time | 2 ms maximum (ON/OFF) |
| Connectors | Two 24-pin Fujitsu FCN-365P024-AU |
PLC Backplane Bus & Deterministic I/O Density
The IC693MDL753 interfaces directly with the Series 90-30 backplane bus to ensure deterministic execution of process output commands. High-density channel scaling enables 32 output points within a single rack slot while maintain signal integrity. Backplane communication bus velocity ensures rapid refresh rates for real-time control, while internal firmware compatibility guarantees seamlessly synchronized operations across all baseplates without imposing unexpected CPU cycle latencies.
Frequently Asked Questions
Q: What are the backplane current draw requirements for this module?
A: The IC693MDL753 draws a maximum of 260 mA from the internal +5 VDC backplane bus rail. Installers must factor this load into the total power budget of the Series 90-30 power supply.
Q: How does group isolation affect field wiring configurations?
A: The 32 output points split into four independent groups of eight channels. Electrical isolation of 250 VAC between groups allows operators to execute individual power source connections for each common pin without cross-channel noise propagation.
Q: Can this module undergo hot-swapping while the PLC rack is energized?
A: No, Series 90-30 I/O racks do not support hot-swapping of I/O modules. You must de-energize backplane rack power before removing or inserting the module to prevent equipment damage or signal corruption.
Field Installation Guidelines
Mount the module securely into any available I/O slot of a Series 90-30 baseplate. Verify that backplane power is turned off prior to insertion. Secure field wiring through two standard 24-pin Fujitsu FCN-365P024-AU connectors or recommended IC693CBL327/328 pre-wired cable assemblies. Maintain proper shielding protocols by grounding cable shields at a single point near the enclosure entry. Separate low-voltage DC output wiring from high-voltage AC cables by a minimum of 300 mm to suppress electro-magnetic interference. Ensure adequate panel convection airflow to maintain operating temperatures within the specified 0 to 60 deg C window under full 4 A module load conditions.