IC693PWR322 GE Fanuc Series 90-30 Standard Power Supply
Manufacturer: GE Fanuc
-
Part Number: IC693PWR322
Condition：New with Original Package
Product Type: Standard Power Supplies
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693PWR322 Series 90-30 Power Supply Module
Configured for system power conversion in Series 90-30 automation platforms, the GE Fanuc IC693PWR322 (IC693PWR322 Standard Power Supply) provides direct physical/electrical execution. This rack-mounted power supply unit converts primary input power into regulated low-voltage direct current rails required by CPU boards, local expansion interfaces, and discrete or analog I/O modules. Operating across the baseplate backplane, the unit routes logical power and isolated field supply currents while maintaining continuous internal monitoring through front-panel LED status displays.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693PWR322 |
| Brand | GE Fanuc / Emerson |
| Origin | USA |
| Weight | 0.68 kg (1.50 lbs) |
| Dimensions | 3.5 cm x 13.0 cm x 13.5 cm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 50 W maximum at full load |
| Input Voltage Range | 21 to 56 VDC (Start); 18 to 56 VDC (Run) / nominal 24 VDC / 48 VDC |
| Inrush Current | 4 A peak, 100 ms maximum |
| Total Output Capacity | 30 W maximum total power output |
| +5 VDC Output | Up to 15 W maximum for backplane logic circuits |
| +24 VDC Relay Output | Up to 15 W maximum for relay circuits |
| +24 VDC Isolated Output | Up to 20 W maximum for loop power and external devices |
| Holdup Time | 14 ms minimum ride-through time |
| Diagnostic LEDs | PWR, OK, RUN, BATT |
Backplane Bus Architecture and Network Determinism
The IC693PWR322 installs directly into the leftmost power slot of Series 90-30 baseplates, interfacing directly with the internal backplane bus communication velocity pathways. Internal regulation circuits distribute deterministic +5 VDC logic levels alongside +24 VDC auxiliary power to maintain continuous CPU scan execution without voltage dropouts. Incorporating built-in noise suppression, the hardware maintains firmware flash compatibility across connected I/O cards by filtering field-side electrical transients. Proper current calculation across the backplane rails prevents localized thermal overload, allowing stable I/O density scaling across complex multi-slot baseplate architectures.
Frequently Asked Questions
Q: What occurs if the total power demand on the +5 VDC and +24 VDC rails exceeds 30 Watts?
A: The internal overcurrent protection circuits trip to shut down output power, causing the backplane logic to drop out and forcing the PLC system into a safe stop condition.
Q: Can an external 24 VDC power supply supplement the isolated +24 VDC output of the IC693PWR322?
A: Yes. External 24 VDC supplies can power field devices directly, provided field commons remain isolated from the backplane logic power returns to prevent ground loops.
Q: How does the power supply handle brief input voltage drops on the DC source feed?
A: Internal storage capacitors provide a minimum holdup time of 14 ms, permitting the supply to maintain full output regulation during minor supply line interruptions.
Field Installation Guidelines
- Disconnect primary power sources before mounting or removing the power supply module from the baseplate slot.
- Insert the module guide tabs into the leftmost slot of the Series 90-30 rack and pivot firm pressure downward until the module latch engages the baseplate frame securely.
- Connect input power cables to the screw terminal block on the module front panel, maintaining strictly observed polarity for DC input conductors.
- Torque all terminal screw connections to standard panel specifications and route field wiring away from low-voltage communication cabling to minimize inductive noise coupling.