IC693PWR330E GE 30W AC/DC Power Supply Modules Series 90-30
Manufacturer: GE Fanuc
-
Part Number: IC693PWR330E
Condition：New with Original Package
Product Type: Power Supply Units
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693PWR330E Series 90-30 Power Supply Module
The GE Fanuc IC693PWR330E, also cataloged as the IC693PWR330 Power Supply Unit, operates as a dedicated hardware component for high-capacity backplane power distribution within Series 90-30 PLC systems. Installed exclusively into the dedicated power supply slot at the far-left position of any Series 90-30 baseplate, the module converts raw AC or DC input voltage into regulated +5 VDC logic power, +24 VDC relay power, and isolated +24 VDC output rails to drive CPU, I/O, and option modules.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693PWR330E |
| Brand | GE Fanuc |
| Origin | United States |
| Weight | 0.54 kg |
| Dimensions | 152 x 51 x 127 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 90 VA max (AC input), 50 W max (DC input) |
| Base Model | IC693PWR330 |
| Nominal Input Voltage | 120/240 VAC or 125 VDC |
| Input Voltage Range | 85 to 264 VAC, 100 to 300 VDC |
| Total Output Power Rating | 30 W maximum total output capacity |
| Output Voltage Rails | +5 VDC (5.0 to 5.2 VDC), +24 VDC Relay (24 to 28 VDC), Isolated +24 VDC (21.5 to 28 VDC) |
| Max Output Currents | +5 VDC (up to 30 W), +24 VDC Relay (15 W max), Isolated +24 VDC (20 W max) |
| Holdup Time | >= 20 ms minimum at nominal input |
| Protection Limits | Overvoltage (6.4 to 7.0 V limit), Overcurrent (7.0 A max on +5 VDC rail) |
| Status Indicators | PWR, OK, RUN, BATT LEDs |
Backplane Bus Communication Velocity & I/O Density Scaling
The IC693PWR330E provides stable power regulation directly to the parallel backplane bus, enabling fast module-to-module scanning and maintaining optimal backplane bus communication velocity across high-density I/O configurations. Delivering up to 30 W allocated to the +5 VDC backplane rail allows system engineers to maximize slot utilization without exceeding backplane current limits, facilitating efficient I/O density scaling in multi-rack expansion topologies.
Frequently Asked Questions
Q: Can the IC693PWR330E power supply unit be installed in a standard I/O slot?
A: No, the module features specialized mechanical keys and backplane pins designed exclusively to fit the dedicated power supply slot at the far-left side of Series 90-30 baseplates.
Q: Does the IC693PWR330E support live swapping while the baseplate is energized?
A: No, main line supply power must be fully isolated before removing or installing the power supply module to prevent electrical arcing and backplane logic disruption.
Q: What function does the isolated +24 VDC output rail serve on the terminal strip?
A: The isolated +24 VDC output provides clean DC field power for input circuits, external sensor loops, and 24 VDC module power requirements directly from the power supply terminals.
Field Installation Guidelines
- Disconnect all incoming AC or DC line power sources before wiring or mounting the power supply module to the baseplate.
- Connect incoming line power, neutral/common, and protective earth wires securely to the 6-position terminal strip on the front panel.
- Ensure a low-resistance copper grounding wire runs from the baseplate earth ground terminal directly to the enclosure frame to prevent noise interference.
- Verify that total power consumption across all +5 VDC, +24 VDC relay, and isolated +24 VDC outputs does not exceed the maximum combined power rating of 30 W.