IC694ALG390 GE Fanuc PACSystems RX3i Analog Output Module
Manufacturer: GE Fanuc
-
Part Number: IC694ALG390
Condition：New with Original Package
Product Type: Analog Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC694ALG390 PACSystems RX3i Analog Output Module
The GE Fanuc IC694ALG390, also cataloged as the IC694ALG390 Analog Output Module, operates as a dedicated hardware component for high-precision bipolar voltage signal generation within PACSystems RX3i backplane platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC694ALG390 |
| Brand | GE Fanuc / Emerson |
| Origin | USA |
| Weight | 0.48 kg (1.06 lbs) |
| Dimensions | Standard RX3i Single-Slot Module |
| Operating Temp | 0 deg C to +60 deg C |
| Power Consumption | 32 mA at 5 VDC, 120 mA at 24 VDC |
| Output Channels | 2 isolated analog channels |
| Voltage Range | -10 V to +10 V |
| Resolution | 13-bit |
| Update Speed | 5 ms per channel |
| Channel Isolation | Channel-to-channel isolation present |
| Diagnostics | High/low alarms, ramp rate control, clamping, overrange/underrange detection |
| Certifications | UL, UL HAZLOC, CE, ATEX C1D2, ABS, BV, DNV, GL, KRS, LR |
Backplane Bus Communication & Deterministic Processing
The module interfaces directly through the PACSystems RX3i backplane bus communication velocity architecture, maintaining high-speed deterministic sync cycles for real-time loop execution. Digital-to-analog converter logic maps 13-bit binary data directly to physical bipolar -10 V to +10 V potential drivers while channel-to-channel isolation suppresses ground loops and electrical interference. Integrated logic firmware maintains real-time channel diagnostics, including overrange and underrange limits, holding output safety states instantly whenever communication fault conditions register across the main backplane interface.
Frequently Asked Questions
Q: Can the IC694ALG390 module undergo hot-swapping during active RX3i rack execution?
A: Yes, the hardware supports hot-swappable installation, allowing field engineers to extract or insert the module without removing main rack power or disrupting adjacent backplane bus communication.
Q: How does channel-to-channel isolation protect connected field equipment?
A: Channel-to-channel isolation electrically decouples each output circuit, blocking ground loops, high common-mode voltages, and cross-channel transient interference from propagating back into the internal 5 VDC RX3i backplane logic.
Field Installation Guidelines
Engineers must ensure the RX3i rack frame connects directly to the central plant grounding bus with low-impedance copper conductors prior to installing field wiring. Run all analog signal wiring using twisted shielded pair cabling and ground the cable shield at a single point, preferably at the rack ground bar, to prevent ground loop noise from corrupting output voltages. Field technicians should strip signal leads cleanly to avoid stray strands, confirm field terminal block screw torque ratings before applying external power, and verify that cable routing maintains proper separation from high-voltage AC motor leads or switching power lines to eliminate EMI coupling.