IC695CPE310-AEBD GE PACSystems RX3i CPU Processors
Manufacturer: GE Fanuc
-
Part Number: IC695CPE310-AEBD
Condition：New with Original Package
Product Type: CPU Processors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC695CPE310-AEBD PACSystems RX3i CPU Module
Configured for high-speed logic execution and real-time process coordination in PACSystems RX3i platforms, the GE IC695CPE310-AEBD (IC695CPE310 CPU Module) provides direct physical/electrical execution across dual PCI and serial backplanes.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695CPE310-AEBD |
| Brand | GE / Emerson |
| Origin | USA |
| Weight | 1.2 kg |
| Dimensions | Standard RX3i module width |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Backplane bus powered |
| Processor | 1.1 GHz Intel Atom |
| User Memory | 13 MB |
| Discrete I/O Capacity | 32k bits |
| Analog I/O Capacity | 32k words |
| Network Interfaces | 3 x Ethernet (10/100/1000 Mbps with 2-port switch) |
| Serial Interfaces | 1 x RS-232, 1 x RS-485 |
| Serial Protocols | SRTP Client, Modbus RTU Slave, SNP Slave |
| Network Redundancy | Media Redundancy Protocol (MRP) via PNC001 |
| Energy Backup | Energy Pack included |
| Mounting Type | Backplane-mounted |
Backplane Bus Communication Velocity and Firmware Compatibility
The module utilizes a high-speed PCI backplane architecture alongside a serial bus to sustain rapid I/O scan update rates across local rack components. High backplane bus communication velocity allows high-density discrete and analog module processing without creating data transfer bottlenecks. Strict firmware flash compatibility mechanisms protect the CPU during system upgrades, preventing application execution errors across complex industrial network setups.
Frequently Asked Questions
Q: How does the onboard Energy Pack function during unexpected primary power loss?
A: The Energy Pack provides short-term auxiliary power to flush volatile active system memory to non-volatile flash memory upon sensing main power removal, preserving user logic and system memory registers without requiring lithium batteries.
Q: What physical network configurations are supported using the three built-in Ethernet ports?
A: The three Ethernet ports support direct star topologies or line/ring topologies via the integrated two-port unmanaged switch. Connecting the module to an external PNC001 PROFINET Controller enables Media Redundancy Protocol (MRP) ring recovery.
Q: Is hot-swapping or live insertion supported for this CPU module within an active RX3i rack?
A: No, you must shut down system power to the RX3i base rack before installing or removing the CPU module. Removing the CPU card during active operation disrupts backplane bus communication and risks electrical damage to edge connectors.
Field Installation Guidelines
Align the card edge connector with the designated CPU slot in the PACSystems RX3i universal backplane. Seat the module firmly into place until the top and bottom metal retaining clips snap locked onto the rack frame to establish protective earth grounding. Maintain minimum wire bending radii for Ethernet and serial communications cables to avoid signal degradation. Route all low-voltage communication lines through dedicated wire channels separated from high-voltage AC motor circuits to minimize transient noise pickup.