IC695CPK330-ABAF GE PACSystems RX3i CPU Modules
Manufacturer: GE Fanuc
-
Part Number: IC695CPK330-ABAF
Condition：New with Original Package
Product Type: CPU Processors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE PACSystems RX3i IC695CPK330-ABAF CPU Module
Configured for high-speed deterministic processing and advanced process control in PACSystems RX3i architectures, the GE PACSystems RX3i IC695CPK330-ABAF (IC695CPK330 CPU Module) provides direct physical/electrical execution across complex automation networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695CPK330-ABAF |
| Brand | GE / GE Fanuc |
| Origin | USA |
| Weight | 3 kg |
| Dimensions | Standard RX3i CPU single-slot backplane form factor |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Power supplied via RX3i backplane / Energy Pack backup module |
| Processor | 800 MHz dual-core processor |
| User Memory | 64 MB standard user memory; 1 GB DDR4 RAM, 512 MB Flash |
| I/O Capacity | 32k bits discrete I/O, 32k words analog I/O |
| Ethernet Ports | 3x 10/100/1000 Mbps Ethernet ports (2 switched) |
| Onboard Storage & Expansion | 1x CFast card slot, 1x USB-A 2.0 host port |
| Network Protocols | PROFINET, OPC UA, SRTP, Modbus TCP/IP, EGD, DNP3, IEC-61850 |
Deterministic Backplane Execution & Embedded Redundancy
The module coordinates system tasks across RX3i backplanes by leveraging high-speed backplane bus communication velocity Licences to maintain low system latency. Integrated firmware flash compatibility guarantees deterministic logic execution, rapid code flashing, and consistent parameter retention across unpredictable power loss events. The included Energy Pack provides dedicated backup power to safely flush active operational data from RAM into non-volatile Flash memory during unexpected main line power interruptions. Furthermore, native PROFINET System Redundancy (PNSR) and Media Redundancy Protocol (MRP) support enable seamless failover configurations, preventing process shutdowns and maintaining deterministic CPU synchronization.
Frequently Asked Questions
Q: What function does the included Energy Pack serve during an unannounced main power loss?
A: The Energy Pack delivers localized backup power to the CPU module, allowing active RAM data to write safely into non-volatile Flash memory before complete shutdown.
Q: Can the IC695CPK330-ABAF module be inserted or removed while the RX3i rack power is active?
A: No, standard RX3i backplane guidelines require isolating rack power and external supply connections before physically installing or pulling the CPU module.
Q: Which network interfaces are available onboard for distributed I/O control?
A: The unit features three 10/100/1000 Mbps Ethernet ports supporting PROFINET, Modbus TCP/IP, OPC UA, and Ethernet Global Data (EGD) to interface directly with remote devices.
Field Installation Guidelines
- Power Isolation Safeguards: Turn off main supply power to the RX3i baseplate and disconnect external battery or Energy Pack leads before installing the CPU module into the rack slot.
- Backplane Slot Insertion: Align the module circuit card with the frame guides of slot 0 or slot 1 in the primary RX3i baseplate, pushing firmly until the module latches fully engage.
- Energy Pack Wiring Connection: Mount the Energy Pack assembly adjacent to the CPU according to chassis layout specifications, attaching the dedicated power link cable to the designated module interface port.
- Shielded Ethernet Trunking: Connect high-speed communication trunks using industrial-grade shielded twisted-pair CAT6 cables, terminating cable shields at ground bars to mitigate ambient noise.
- Physical Wiring Separation: Maintain a minimum clearance of 30 cm between signal lines, network communications cabling, high-voltage AC distribution circuits, and variable frequency drive outputs.