IC695ETM001-HT GE PACSystems RX3i Communication Modules
Manufacturer: GE Fanuc
-
Part Number: IC695ETM001-HT
Condition：New with Original Package
Product Type: Communication Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE PACSystems RX3i IC695ETM001-HT Ethernet Interface Module
Configured for high-speed network communication and control integration in PACSystems RX3i networks, the GE PACSystems RX3i IC695ETM001-HT (IC695ETM001 Ethernet Interface Module) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695ETM001-HT |
| Brand | GE / GE PACSystems |
| Origin | USA |
| Weight | 0.51 kg (1.13 lbs) |
| Dimensions | Single-slot RX3i module chassis size |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 1.2 A at +3.3 VDC backplane supply |
| Ethernet Interfaces | 2 x 10/100 Mbps auto-negotiating RJ-45 ports (8-pin female shielded) |
| Serial Interface | 1 x RS-232 port (9-pin female D-connector, 1200 bps to 115200 bps) |
| Ethernet Processor | 200 MHz processor engine |
| Network Protocols | SRTP, Modbus TCP/IP, Ethernet Global Data (EGD), TCP/IP |
| Channel Isolation | 1500 V RMS network-to-backplane isolation |
Deterministic Industrial Ethernet & Backplane Bus Performance
The module executes deterministic client/server packet transfer across Profinet / EtherNet/IP deterministic networks, enabling continuous data exchange between RX3i controllers, HMIs, and SCADA architectures. Operating via a dedicated 200 MHz onboard Ethernet processor, the hardware processes real-time SRTP and Ethernet Global Data (EGD) exchanges while routing data across the universal backplane using high-speed backplane bus communication velocity Licences. Dual 10/100 Mbps RJ-45 interfaces feature full-duplex auto-negotiation and auto-sensing capabilities, and onboard non-volatile memory maintains operational parameters during power loss. Firmware flash compatibility allows field updates over Ethernet, while embedded web server diagnostics present real-time channel status and network traffic statistics.
Frequently Asked Questions
Q: Does inserting or removing this module require de-energizing the main PACSystems RX3i rack power?
A: The module supports hot-swapping under live rack conditions, provided the operator pauses active network polling on connected field channels to prevent bus timeout faults.
Q: How do field engineers configure network parameters on the module without prior IP address assignment?
A: Configuration assigns static IP addresses or DHCP settings via Proficy Machine Edition (PME) over the local backplane, or through the front RS-232 serial interface port.
Q: What power rail allocations must technicians calculate prior to baseplate slot selection?
A: System power calculations must assign a dedicated 1.2 A current draw from the +3.3 VDC universal backplane power rail for each installed module.
Field Installation Guidelines
- Safety Measures & ESD Grounding: Isolate field network power supplies before handling hardware, and attach a grounded ESD wrist strap to an unpainted metal surface on the panel frame.
- Backplane Insertion: Align the module frame with the guide slots of the designated IC695 Universal Backplane position, pressing firmly until the top and bottom panel locks engage.
- Ethernet Cable Routing: Connect Category 5e or Category 6 shielded twisted-pair (STP) cables to the female RJ-45 connectors, grounding cable shields at one termination point to suppress electromagnetic noise.
- Serial Cable Routing: Secure RS-232 serial links using shielded 9-pin D-sub connectors with screw locks, routing data cables away from AC power lines by at least 30 cm.
- Baseplate Ground Continuity: Connect the universal baseplate chassis ground lug directly to the central panel earth ground bar using a heavy-gauge copper bonding strap.