IC755CSS12CDA GE QuickPanel+ 12.1-Inch Touchscreen Interface
Manufacturer: GE Fanuc
-
Part Number: IC755CSS12CDA
Condition：New with Original Package
Product Type: Human Machine Interfaces
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC755CSS12CDA QuickPanel+ Operator Interface
The GE IC755CSS12CDA, also cataloged as the IC755CSS12CDA QuickPanel+ Touch Panel, operates as a dedicated hardware component for high-performance operator visualization and control execution within GE automation networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC755CSS12CDA |
| Brand | GE |
| Origin | USA / Global Manufacturing |
| Weight | 3.04 kg (6.71 lbs) |
| Dimensions | 314 x 248 x 65 mm (12.3 x 9.7 x 2.5 in) |
| Operating Temp | Standard Industrial Grade (0 deg C to +50 deg C nominal) |
| Power Consumption | Industrial DC Voltage Supply Inputs |
| Display Type | 12.1-inch TFT LCD, 800 x 600 pixels WVGA, 450 cd/m2 brightness, 65536 colors |
| Touchscreen | Projective capacitive, two-point touch input |
| Processor & Memory | Freescale i.MX535 1 GHz ARM Cortex-A8, 1 GB DDR3 SDRAM, 512 MB SLC NAND ROM, 512 KB SRAM with battery backup |
| Expansion Storage | 1 x SD/SDHC card slot |
| Communication Interfaces | 2 x 10/100BaseT Ethernet (RJ-45), 1 x RS-232 UART, 1 x RS-232/485 |
| USB Interfaces | 2 x USB 2.0 Type-A (Host), 1 x USB 2.0 Mini Type-B |
| Mounting Options | Panel-mount or VESA mounting support |
Backplane Bus Communication Velocity & Firmware Flash Compatibility
The GE IC755CSS12CDA utilizes optimized backplane bus communication velocity drivers to achieve rapid data refresh cycles across dual 10/100BaseT Ethernet ports and integrated serial interface channels. Driven by a 1 GHz Freescale i.MX535 ARM Cortex-A8 processor, the unit handles high-density I/O rendering while executing background system tasks. The architecture maintains firmware flash compatibility across onboard 512 MB SLC NAND ROM and SD/SDHC expansion storage, facilitating deterministic data processing without causing network execution latencies.
Frequently Asked Questions
Q: How does the projective capacitive touchscreen handle multi-touch interactions in industrial environments?
A: The projective capacitive display interface registers up to two-point touch inputs concurrently, allowing precise screen interactions without degradation during continuous panel operations.
Q: What mechanisms preserve data in the event of an unplanned external power loss?
A: The unit includes 512 KB of internal SRAM supported by an integrated battery backup circuit, retaining critical system parameters and runtime data during abrupt power interruptions.
Q: Can the dual Ethernet interfaces be deployed across isolated networks?
A: Yes, the two 10/100BaseT RJ-45 Ethernet ports allow independent configuration to route visualization traffic on standard control buses while connecting directly to localized plant networks.
Field Installation Guidelines
To ensure proper physical support and reduce electromagnetic noise interference during field deployment, complete the following installation steps:
- Cut enclosure openings precisely to 314 x 248 x 65 mm specifications when utilizing panel-mount configurations, ensuring even tension on perimeter mounting clamps to secure the front seal.
- Verify standard VESA mount bracket dimensions prior to mechanical attachment when using arm-mounted setups to prevent housing torque stresses.
- Ground the terminal chassis lug directly to the central panel cabinet earth rail via a short, low-impedance copper strap.
- Route dual RJ-45 Ethernet cables and serial communication lines in separate wire trays away from high-voltage motor supply leads to eliminate electrical cross-talk.
- Shield all RS-232/485 signal runs and terminate cable drain wires at a single grounding point.