IS215ACLEH1C GE Mark VIe Application Control Layer Module
Manufacturer: GE Fanuc
-
Part Number: IS215ACLEH1C
Condition：New with Original Package
Product Type: Application Control Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IS215ACLEH1C Application Control Layer Module
The GE IS215ACLEH1C, also cataloged as the IS215ACLE Application Control Layer Module, operates as a dedicated hardware component for closed-loop process execution and communication interface tasks within Mark VIe and EX2100e control platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS215ACLEH1C |
| Brand | GE |
| Origin | China |
| Weight | 1.8 kg |
| Dimensions | 152 x 102 x 229 mm |
| Operating Temp | -25 to +75 deg C |
| Power Consumption | 24 VDC nominal (derived from backplane bus) |
| Processor | 1 GHz PowerPC 750FX CPU |
| Memory | 128 MB SDRAM, 4 MB Flash |
| I/O Channels | 4 analog inputs, 4 analog outputs, 6 digital inputs |
| Communication | Dual Ethernet 10/100 Base-TX, CANbus, USB 2.0 |
Backplane Bus Communication and Deterministic Performance
The unit mounts directly into the Mark VIe cabinet backplane, achieving high-speed data exchange with adjacent controllers and interface modules. To support strict scan-time requirements for turbine and excitation regulations, the module maintains firmware flash compatibility with the central control processor. This architecture ensures synchronized communication velocity over the internal bus, optimizing loop execution and limiting packet latency during transient process occurrences.
Frequently Asked Questions
Q: How is the firmware on the IS215ACLEH1C updated or synchronized?
A: Firmware synchronization is initiated and deployed through the standard Mark VIe system configuration software, which flashes the module directly across the backplane bus to ensure compatibility with the host controller.
Q: What is the maximum load current supported by the analog output channels?
A: The onboard analog outputs conform to industrial 4-20 mA and 0-10 VDC specifications, designed to drive standard high-impedance actuator loops and positioning devices without signal degradation.
Q: Is hot-swapping of the IS215ACLEH1C module supported while the control system is active?
A: No, the system must be powered down before extracting or inserting this processor-level module to prevent backplane bus communication errors and potential damage to the physical electrical interfaces.
Field Installation Guidelines
- Insert the module into the designated dual slot on the system rack, ensuring the rear connectors fully engage with the passive backplane.
- Tighten the top and bottom captive retaining screws to secure the physical assembly and verify solid electrical ground continuity.
- Connect the dual redundant Ethernet cables to the RJ-45 ports, ensuring the latching mechanisms click firmly into place.
- Use shielded twisted-pair cabling for all external analog input and output connections to suppress high-frequency electromagnetic noise.