IS230SNAIH2A GE Mark VIe Analog Input Terminal Board
Manufacturer: GE Fanuc
-
Part Number: IS230SNAIH2A
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IS230SNAIH2A Mark VIe Analog Input Terminal Board
The GE IS230SNAIH2A, also cataloged as the IS230SNAIH2A Analog Input Terminal Board, operates as a dedicated hardware component for high-precision analog signal acquisition within Mark VIe turbine control architectures.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS230SNAIH2A |
| Brand | GE Mark VIe |
| Origin | USA |
| Weight | 0.91 kg |
| Dimensions | 233 mm x 160 mm x 25 mm |
| Operating Temp | -40 deg C to 70 deg C |
| Power Consumption | Backplane dependent |
| Performance | 8-channel +/- 10 V, 4-20 mA inputs, 16-bit resolution |
Profinet / EtherNet/IP Deterministic Networks
The IS230SNAIH2A maintains backplane bus communication velocity to ensure real-time analog data throughput to the Mark VIe I/O pack. The module utilizes firmware flash compatibility to execute diagnostic monitoring, including input loop health checks and signal range validation. Its design facilitates I/O density scaling, supporting TMR (Triple Modular Redundant) configurations through parallel signal processing paths. By implementing deterministic communication protocols over the backplane, the board aligns analog signal sampling with the controller scan interval, ensuring stability in critical feedback control loops.
Frequently Asked Questions
Q: Does the IS230SNAIH2A support hot-swapping within the control rack?
A: No, the terminal board requires the removal of field power and the decoupling of the I/O pack before extraction to prevent electrical damage to the connector interfaces or the backplane bus.
Q: How is the channel isolation maintained in high-noise environments?
A: The board employs galvanic isolation on a per-channel basis to decouple field-side voltage references from the system chassis ground, preventing ground loop interference and protecting the analog conversion circuitry from transients.
Field Installation Guidelines
Mount the IS230SNAIH2A onto the designated DIN rail assembly within the control cabinet, ensuring that all terminal block mounting clips are fully engaged. Terminate field instrumentation wiring to the screw terminals, utilizing shielded twisted-pair cabling to minimize electromagnetic induction. Connect the ribbon cable from the corresponding I/O pack to the module interface, ensuring proper keying and alignment. Verify that the shield drain wires are terminated to the cabinet's designated earth ground bus. After installation, use the Control System Toolbox to verify the board address and confirm that analog signals are calibrated within the expected operating ranges before system initialization.