KJ2201X1-HA1 Emerson Safety Terminal Block
Manufacturer: Emerson
-
Part Number: KJ22011X1-HA1
Condition：New with Original Package
Product Type: Safety I/O Terminal Blocks
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Emerson KJ2201X1-HA1 DeltaV SIS CSLS Terminal Block
The Emerson KJ2201X1-HA1, also cataloged as the KJ2201X1-HA1 CSLS Terminal Block, operates as a dedicated hardware component for safety logic execution and field I/O termination within Emerson DeltaV SIS platforms. The physical interface mounts CHARacterization Modules (CHARMs), routing discrete and analog field signals directly to the Smart Logic Solver processing engine.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | KJ2201X1-HA1 |
| Brand | Emerson |
| Origin | USA |
| Weight | 0.3 kg |
| Dimensions | 107 x 41 x 105 mm |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | 24 VDC nominal |
| Product Type | CHARMs Smart Logic Solver Terminal Block |
| System Compatibility | Emerson DeltaV SIS |
| Safety Standard | IEC 61508 SIL 3 capable |
| Communication Interfaces | Redundant Ethernet and LocalBus |
| Storage Temperature | -40 to +85 deg C |
| Humidity Range | 5% to 95% non-condensing |
| Mechanical Resistance | Shock: 10 g half-sine wave for 11 ms; Vibration: 1 mm peak-to-peak (2-13.2 Hz), 0.7 g (13.2-150 Hz) |
| Ingress & Contaminants | IP20, ISA-S71.04 Class G3 |
| Certifications | CE, UL, ATEX, IECEx, FM, UKEX (Zone 2 / Class I Div 2) |
4-20 mA HART Loop Protocol and Safety Circuitry
The KJ2201X1-HA1 terminal block routes field signals from individual CHARMs to the safety logic solver architecture. When hosting analog CHARM devices, the terminal base supports 4-20 mA HART loop protocol pass-through communication, allowing digital instrument diagnostic variables, calibration markers, and device health flags to transition across the DeltaV SIS infrastructure. Channel-to-channel isolation across inserted CHARM channels prevents electrical ground loops and protects safety logic execution circuits from field side surges.
Frequently Asked Questions
Q: Can engineers replace CHARM modules on the KJ2201X1-HA1 base while the terminal block is energized?
A: Yes. Individual CHARM modules support live hot-swapping on the terminal block base under power without disrupting backplane communications or disturbing adjacent channels.
Q: How does the KJ2201X1-HA1 handle power distribution across the field termination points?
A: The terminal block connects directly to the carrier power bus, supplying regulated 24 VDC power across field loop connections while maintaining isolation between individual channel paths.
Q: What mounting precautions prevent vibration-induced signal loss in high-vibration cabinets?
A: Ensure the terminal block locks fully onto the carrier DIN rail and verify that module retention latches lock completely to withstand mechanical shock up to 10 g.
Field Installation Guidelines
Mount the KJ2201X1-HA1 terminal block on the designated DeltaV SIS carrier rail, snapping the rear locking mechanism firmly into place. Connect 24 VDC power feed lines and Ethernet cables to the carrier baseplate, keeping signal wiring separated from high-voltage distribution lines to eliminate electromagnetic coupling. Torque field wiring terminals according to standard panel guidelines and ground all cable shields at a single low-impedance ground bar before applying power.