KJ4006X1-BD1 Emerson Controller Carrier | New & Original Stock
Manufacturer: Emerson
-
Part Number: KJ3102X1-BA1 12P1863X032
Condition：New with Original Package
Product Type: PLC Controller Carriers
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Emerson KJ4006X1-BD1 DeltaV Controller/Power Carrier
The Emerson KJ4006X1-BD1 serves as the primary KJ4006X1-BD1 DeltaV Controller/Power Carrier utilized to execute power distribution and signal routing across Emerson DeltaV DCS platforms. The hardware functions as an integrated electrical backplane and structural frame, establishing native LocalBus communication links and primary voltage rails directly between matching controllers, subsystem power supplies, and adjacent I/O interface blocks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | KJ4006X1-BD1 |
| Brand | Emerson |
| Origin | United States |
| Weight | 0.82 kg |
| Dimensions | 330 mm x 140 mm x 50 mm |
| Operating Temp | -40 to 70 deg C |
| Power Consumption | Sourced via backplane (24 VDC nominal system power input) |
| System Compatibility | Emerson DeltaV Distributed Control System (DCS) |
| LocalBus Rating | 12 VDC at 150 mA maximum |
| Bussed Field Power Rating | 12 VDC at 300 mA maximum |
| Field Circuit Rating | 24 VDC at 32 mA maximum |
| Shock Resistance | 10 g half-sine wave for 11 ms duration |
| Vibration Resistance | 1 mm peak-to-peak (2 to 13.2 Hz); 0.7 g (13.2 to 150 Hz) |
| Airborne Contaminants | ISA-S71.04 Class G3 corrosive environment rating |
| Protection Class | IP20 ingress rating |
| Certifications | CE, UL, ATEX, IECEx (Zone 2 / Class I Division 2) |
FOUNDATION Fieldbus / Profibus PA Connectivity and Bus Logic Execution
The KJ4006X1-BD1 acts as the primary backplane backbone that links central controller logic directly to down-stream field network cards, providing the electrical path needed to manage upstream data aggregation for FOUNDATION Fieldbus / Profibus PA connectivity configurations. The carrier board routes high-speed data packets via internal LocalBus traces, maintaining constant impedance boundaries across all card slots to eliminate signal reflection and cross-talk. By integrating power trace boundaries directly into the multi-layer circuit card assembly, the base architecture distributes a 12 VDC at 150 mA LocalBus current allocation concurrently with 24 VDC logic paths, ensuring deterministic control response times across all attached processing nodes.
Frequently Asked Questions
Q: What are the specific power supply limitations managed by this carrier board assembly?
A: The board distributes a nominal 24 VDC supply voltage across the structural slots, featuring specific maximum limit boundaries for sub-circuits. The physical LocalBus lines are restricted to 12 VDC at 150 mA, while the internal bussed field power lines handle up to 12 VDC at 300 mA to protect the control core from field instrumentation shorts.
Q: Can the main controller or power modules be removed from this carrier while energized in hazardous locations?
A: No. While the underlying DeltaV hardware supports specific module hot-swapping under controlled settings, breaking connections under power inside a certified Zone 2 or Class I Division 2 classified zone introduces live arcing risks. Field power must be fully isolated or the atmosphere verified as non-hazardous prior to module extraction.
Field Installation Guidelines
- Carrier Structural Tiling: Secure the carrier chassis directly to a flat, vertical panel surface or rigid DIN rail system. Ensure all integrated mounting screws are fully tightened to maintain the structural alignment necessary for zero-stress module mating.
- Ground plane Integration: Connect the carrier frame grounding terminal directly to the enclosure main earth ground bus bar using a low-impedance conductor to ensure full active protection against localized surge voltage transients.
- Interconnecting Ribbon Cable Dress: Use only certified DeltaV bus expansion cables when joining adjacent carriers. Verify the cable connectors seat completely and the locking bails are locked to prevent communication data frame corruption under continuous 10 g industrial machinery vibration.
- Environmental Ambient Control: Maintain internal cabinet ventilation pathways to ensure the localized air envelope remains within the -40 to 70 deg C limits, preventing thermal concentration that could trigger internal component degradation.