KJ4006X1-BL1 Emerson DeltaV DCS Controller Carrier Baseplate
Manufacturer: GE Fanuc
-
Part Number: KJ4006X1-BL1
Condition：New with Original Package
Product Type: Controller Baseplate
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Emerson KJ4006X1-BL1 DeltaV Controller Carrier
The Emerson KJ4006X1-BL1, also cataloged as the KJ4006X1-BL1 DeltaV Controller Carrier, operates as a dedicated hardware component for power distribution and backplane routing within Emerson DeltaV DCS platforms. The baseplate connects controllers, power supply units, and communication interfaces directly to the LocalBus subsystem without inter-module ribbon cabling.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | KJ4006X1-BL1 |
| Brand | Emerson |
| Origin | USA |
| Weight | 0.82 kg |
| Dimensions | 330 x 140 x 50 mm |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | Nominal Input: 24 VDC |
| Product Type | Controller Carrier |
| System Compatibility | Emerson DeltaV DCS |
| LocalBus Rating | 12 VDC at 150 mA |
| Bussed Field Power Rating | 12 VDC at 300 mA |
| Field Circuit Rating | 24 VDC at 32 mA |
| Storage Temperature | -40 to +85 deg C |
| Humidity Range | 5% to 95% non-condensing |
| Mechanical Resistance | Shock: 10 g half-sine wave for 11 ms; Vibration: 1 mm peak-to-peak (2-13.2 Hz), 0.7 g (13.2-150 Hz) |
| Protection & Contaminants | IP20, ISA-S71.04 Class G3 |
| Certifications | CE, UL, ATEX, IECEx (Zone 2 / Class I Div 2) |
4-20 mA HART Loop Protocol and System Backplane Routing
The KJ4006X1-BL1 carrier serves as the primary physical backbone for internal power feeds and control signals. Onboard power traces supply 24 VDC system power alongside 12 VDC LocalBus power rated at 150 mA. The backplane bus structure isolates point-to-point communication paths, allowing attached I/O modules and HART pass-through signals from 4-20 mA HART field devices to transmit directly to DeltaV system controllers without data corruption or backplane signal attenuation.
Frequently Asked Questions
Q: Can controllers or power modules mounted on the KJ4006X1-BL1 be hot-swapped while energized?
A: Yes. The carrier backplane supports live insertion and removal of DeltaV controllers and system modules without interrupting power or signal flow to adjacent carrier slots.
Q: How does the carrier manage channel-to-channel power distribution across attached modules?
A: The integrated backplane routes a 12 VDC at 300 mA bussed field power rail and a 24 VDC at 32 mA field circuit supply across individual card slots through dedicated bus connectors.
Q: What grounding requirements apply when installing the carrier in Class I Div 2 cabinets?
A: The carrier backplane must bond to the enclosure single-point earth ground bar via dedicated mounting chassis tabs to maintain ISA-S71.04 Class G3 protection standards.
Field Installation Guidelines
Position the KJ4006X1-BL1 carrier onto the enclosure mounting panel and secure all chassis retaining screws to ensure proper grounding to the cabinet backplate. Connect the primary 24 VDC power feed cables to the carrier power terminals, maintaining strict physical isolation between DC power lines and high-voltage AC distribution circuits. Verify that carrier terminal keys match the corresponding controller slots before inserting active hardware modules. Maintain ambient air movement around the carrier to keep operating temperatures within the -40 to +70 deg C envelope.