{"product_id":"master-drive-system-module-abb-57310255-av-dsrf180a","title":"Master Drive System Module ABB 57310255-AV DSRF180A","description":"\u003ch2\u003eABB DSRF180A Master Drive System Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eABB 57310255-AV\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDSRF180A\u003c\/strong\u003e Drive System Module, operates as a dedicated hardware component for communication and control interface execution within ABB Master drive systems. The module establishes direct electrical and data routing paths between the core drive logic and external automation network topologies. Operating via high-speed physical interface channels, the hardware processes internal bus data packets using an embedded Intel dual-core processor clocked from 1.5 GHz to 2.33 GHz to coordinate drive feedback signals without software-induced runtime delays.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDSRF180A (Part Numbers: 57310255-AV \/ 57311001-S \/ 57311002-S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB Master\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSweden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg (1 lbs 0.0 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.5 cm x 2.5 cm x 2.5 cm (1.0 in x 1.0 in x 1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLess than 3 W @ 12 VDC full load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e9 to 24 VDC (includes reverse polarity and overcurrent protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Memory\u003c\/td\u003e\n\u003ctd\u003e2 DDR2 slots supporting up to 4 GB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash Storage\u003c\/td\u003e\n\u003ctd\u003eCompact Flash slot with IDE\/SATA infrastructure support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical Layer Ports\u003c\/td\u003e\n\u003ctd\u003eRS-232 serial ports, RJ-45 Ethernet (10\/100\/1000Base-T), optical fiber ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia Distance Limits\u003c\/td\u003e\n\u003ctd\u003e100 m copper, 550 m multimode fiber, 10 to 80 km single-mode fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHarmonized Tariff Code\u003c\/td\u003e\n\u003ctd\u003e8537109070\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, UL, TUV, ATEX Zone 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network Architectures and Firmware Alignment\u003c\/h3\u003e\n\u003cp\u003eThe electronic assembly utilizes integrated hardware transceivers configured specifically to sustain Profinet and EtherNet\/IP deterministic networks under sustained full-load conditions. The layout allocates distinct memory spaces within the 4 GB DDR2 array to manage I\/O density scaling continuously across the host backplane bus channels. Factory-loaded boot code maintains complete firmware flash compatibility with the industrial master rack controllers, preventing parameter mismatch errors during data arbitration loops and keeping interface velocity at baseline hardware specifications.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this drive interface module support live hot-swap replacement routines while powered?\u003c\/p\u003e\n\u003cp\u003eA: No. The backplane contact matrix does not possess sequential pin engagement geometries or pre-charge isolation rails. Performing an extraction or insertion while the 24 VDC rail is active causes electrical transients that corrupt active registers inside the dual-core processor and can damage adjacent I\/O modules.\u003c\/p\u003e\n\u003cp\u003eQ: How does the internal storage architecture manage runtime parameters and system recovery data?\u003c\/p\u003e\n\u003cp\u003eA: The hardware routes primary operating system parameters and diagnostic logs through the onboard Compact Flash slot using native IDE\/SATA electrical buses. This localizes the configuration file structure directly on the physical module, eliminating dependence on external network servers during startup cold-boots.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the module securely in its designated slot within the ABB Master system subrack, confirming that the module aligns precisely with the rear backplane connectors before fully seating the assembly. Tighten all mechanical retaining screws to lock the unit against low-frequency industrial vibrations that can loosen internal DDR2 slots.\u003c\/p\u003e\n\u003cp\u003eRoute all copper and fiber optic communication lines away from high-power AC inverter output cabling and three-phase motor lines to prevent electromagnetic field coupling. For copper Ethernet loops, ensure the total distance does not exceed 100 m. When pulling single-mode fiber runs for remote nodes, maintain a minimum physical bend radius of 30 mm to prevent micro-bend losses and signal attenuation at the optical reception interface.\u003c\/p\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":44400991830115,"sku":"DSRF180A 57310255-AV","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/538_15afd923-46f1-43ee-84c7-7d3fb515ab29.jpg?v=1784880005","url":"https:\/\/www.autocontrolglobal.com\/products\/master-drive-system-module-abb-57310255-av-dsrf180a","provider":"AutoControl Global","version":"1.0","type":"link"}