MS-10UD-7E Honeywell Fire Panel | New & Original Stock
Manufacturer: Honeywell
-
Part Number: MS-10UD-7E
Condition：New with Original Package
Product Type: Fire Alarm Control Panels
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Honeywell MS-10UD-7E Fire-Lite Series
The Honeywell MS-10UD-7E, also cataloged as the Honeywell MS-10UD-7E Fire Alarm Control Panel, operates as a dedicated hardware component for fire detection loop management and notification execution within small to medium building safety networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MS-10UD-7E |
| Brand | Honeywell Fire-Lite |
| Origin | USA |
| Weight | 9.3 kg (20.5 lbs) |
| Dimensions | 450 mm x 45 mm x 150 mm |
| Operating Temp | Manufacturer standard industrial rating |
| Power Consumption | 120 VAC input / 24 VDC output execution |
| Product Type | Fire Alarm Control Panel (FACP) |
| Number of Zones | 10 initiating device circuits |
| Notification Circuits | 2 NACs (Notification Appliance Circuits) |
| Battery Backup | Supports rechargeable batteries for standby operation |
| Display | LED indicators and LCD screen |
| Programming | Onboard keypad or PC via USB |
| Certifications | CE, UL508, CSA, TUV |
Process Control and DCS Instrumentation Safety Attributes
The control assembly coordinates system statuses across 10 independent initiating device circuits and 2 Notification Appliance Circuits (NACs). Operating with a primary 120 VAC transformer input stepping down to a 24 VDC output infrastructure, the internal loop cards handle dedicated 4-20 mA HART loop protocol emulations for diagnostic state monitoring or discrete threshold contact mapping. Complete channel-to-channel isolation parameters are integrated across the initiation zones to prevent localized wiring shorts from tripping adjacent detection zones, while localized cold junction compensation (CJC) equations are maintained in firmware logic to preserve signal accuracy during direct thermal-sensor interfacing across the host backplane.
Frequently Asked Questions
Q: What are the backplane current constraints and battery charging load capacities of the MS-10UD-7E panel?
A: The internal power supply board regulates a continuous 24 VDC bus from the 120 VAC source while supplying secondary charging milliamps to the standalone rechargeable battery backup. Total loop and auxiliary current consumption metrics must stay within the specified transformer rating to ensure uninterrupted standby operation.
Q: Can this control panel undergo hot-swap card servicing while the system loop is fully active?
A: No, hot-swap execution is not supported on the main processing module or termination boards. Removing active circuitry from the panel backplane registers an open fault, disrupts terminal voltage stability, and may damage micro-components. The device must be powered down safely beforehand.
Field Installation Guidelines
- Enclosure Mechanical Integrity: Secure the FACP housing to a solid vertical wall surface using the predetermined mounting holes. Maintain clear, dust-free airflow paths around the cabinet parameters to protect internal electrical relays from thermal stress.
- Initiating and Notification Circuit Separations: Route all Class B or Class A initiation wires separately from AC power lines. Utilize twisted, shielded cables for all signal loops to reinforce cross-talk suppression and eliminate electromagnetic noise distortion.
- Earth Grounding Protocols: Bond the incoming AC safety ground wire directly to the main terminal enclosure grounding stud. A reliable, low-impedance connection to earth ground is mandatory to protect internal 24 VDC solid-state electronics from field surge potentials.