{"product_id":"pr6423-000-110-emerson-proximity-sensors-datasheet-technical-manual","title":"PR6423\/000-110 Emerson Proximity Sensors Datasheet \u0026 Technical Manual","description":"\u003ch1\u003eEmerson PR6423\/000-110 + CON021 Proximity Sensors\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eEmerson PR6423\/000-110 + CON021\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003ePR6423\/000-110\u003c\/strong\u003e Eddy Current Displacement Sensor, operates as a dedicated hardware component for non-contact measurement of shaft vibration, axial\/radial displacement, and eccentricity within AMS 6500 and VM600 platforms. Configured alongside the \u003cstrong\u003eCON021\u003c\/strong\u003e signal converter, the system translates high-frequency electromagnetic field variations across an 8 mm probe tip into standard industrial 0-10 V or 4-20 mA analog signals. The hardware enables continuous tracking of mechanical rotor dynamics against a calibrated ferromagnetic steel target.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-row=\"1\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"2\"\u003eModel\u003c\/td\u003e\n\u003ctd data-row=\"2\"\u003ePR6423\/000-110 + CON021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"3\"\u003eBrand\u003c\/td\u003e\n\u003ctd data-row=\"3\"\u003eEmerson (EPRO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"4\"\u003eOrigin\u003c\/td\u003e\n\u003ctd data-row=\"4\"\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"5\"\u003eWeight\u003c\/td\u003e\n\u003ctd data-row=\"5\"\u003e0.2-0.3 kg (Sensor assembly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"6\"\u003eDimensions\u003c\/td\u003e\n\u003ctd data-row=\"6\"\u003e8 mm probe tip diameter with 10 m integrated cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"7\"\u003eOperating Temp\u003c\/td\u003e\n\u003ctd data-row=\"7\"\u003e-40 to +125 deg C (Sensor); up to +160 deg C for T3 variant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"8\"\u003ePower Consumption\u003c\/td\u003e\n\u003ctd data-row=\"8\"\u003ePassive sensor modulated via CON021 standard industrial voltage loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"9\"\u003eLinear Measurement Range\u003c\/td\u003e\n\u003ctd data-row=\"9\"\u003e2 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"10\"\u003eInitial Air Gap\u003c\/td\u003e\n\u003ctd data-row=\"10\"\u003e0.5 mm (20 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"11\"\u003eIncremental Scale Factor\u003c\/td\u003e\n\u003ctd data-row=\"11\"\u003e8 V\/mm +\/-5% at 0-45 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"12\"\u003eTarget Material\u003c\/td\u003e\n\u003ctd data-row=\"12\"\u003eFerromagnetic steel (42CrMo4 \/ AISI 4140 standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"13\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd data-row=\"13\"\u003eUp to 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"14\"\u003eProtection Class\u003c\/td\u003e\n\u003ctd data-row=\"14\"\u003eIP66 (IEC 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"15\"\u003eConverter Outputs\u003c\/td\u003e\n\u003ctd data-row=\"15\"\u003e0-10 V or 4-20 mA analog loops\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-row=\"16\"\u003eCompliance\u003c\/td\u003e\n\u003ctd data-row=\"16\"\u003eAPI 670 standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eOperation of the PR6423\/000-110 assembly requires verifying eddy-current probe scaling variables to maintain an Incremental Scale Factor (ISF) of 8 V\/mm. To align the 8 mm sensor tip within the center of its 2 mm linear measurement window, field personnel perform a gap voltage validation procedure targeting a -10 VDC baseline at the raw sensor output terminals. Adjusting the initial air gap to match this static electrical parameter positions the system inside its calibrated range, preventing signal saturation during peak high-frequency rotor dynamics. Proper mechanical spacing also minimizes high-frequency field cross-talk suppression failures when multiple probes are positioned around the same shaft sector.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 10 m integrated cable of the PR6423\/000-110 sensor be spliced or lengthened before connecting to the CON021 converter?\u003c\/p\u003e\n\u003cp\u003eA: No. The 10 m cable is a calibrated circuit element whose exact capacitance and inductance parameters match the 8 V\/mm scale factor. Splicing or changing the cable length alters the electrical impedance, destroying the system calibration and breaching API 670 accuracy guidelines.\u003c\/p\u003e\n\u003cp\u003eQ: What actions occur if the physical distance between the probe tip and the target exceeds the 2 mm linear range?\u003c\/p\u003e\n\u003cp\u003eA: When the physical distance extends beyond the 2 mm sensing limit, the output voltage generated by the eddy-current loop flattens, dropping out of the linear scaling slope. The paired monitoring system flags a channel error due to an out-of-bounds DC gap voltage condition, disabling active machinery protection logic for that channel.\u003c\/p\u003e\n\u003cp\u003eQ: Does the CON021 signal converter require a separate calibration procedure when alternating between 0-10 V and 4-20 mA output options?\u003c\/p\u003e\n\u003cp\u003eA: The CON021 provides hardware-fixed translation paths for both signal options based on the incoming raw sensor modulation. The selection must match the design parameters of the receiving DCS or machinery monitor input card, but the baseline linear tracking correlation remains pinned to the 8 V\/mm sensor calibration.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Positioning:\u003c\/strong\u003e Thread the probe housing into the holder bracket while monitoring raw electrical parameters. Tighten locknuts once the target gap voltage is reached, ensuring the 8 mm tip clears all adjacent non-target structural metal components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding Control:\u003c\/strong\u003e Connect the integrated coaxial cable shield at one point only, typically at the monitoring rack or CON021 enclosure ground terminal. Do not ground both ends of the shield to eliminate circulating ground loop currents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConduit Path Setup:\u003c\/strong\u003e Encase the 10 m sensor lead inside continuous flexible or rigid metal conduit. Verify exactly 5 full threads of engagement on all NPT adapter junctions to preserve the IP66 rating against process oil ingress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBending Radius Limits:\u003c\/strong\u003e Observe the minimum static bending radius constraints specified for the high-frequency coaxial lead. Avoid bending the cable across sharp machine enclosure corners to prevent internal dielectric insulation failure.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Epro","offers":[{"title":"Default Title","offer_id":43898070925411,"sku":"PR6423\/000-110","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/53.2_775ed10d-256c-4133-aaef-4d21a9eb712d.jpg?v=1766113438","url":"https:\/\/www.autocontrolglobal.com\/products\/pr6423-000-110-emerson-proximity-sensors-datasheet-technical-manual","provider":"AutoControl Global","version":"1.0","type":"link"}