Premium Analog Input | Schneider TSXAEY1614 Modicon
Premium Analog Input | Schneider TSXAEY1614 Modicon
Premium Analog Input | Schneider TSXAEY1614 Modicon
/ 3

Premium Analog Input | Schneider TSXAEY1614 Modicon

  • Manufacturer: Schneider

  • Part Number: TSXAEY1614

  • Condition:New with Original Package

  • Product Type: Analog Input Modules

  • Country of Origin: USA

  • Payment:T/T, Western Union

  • Shipping port: Xiamen

  • Warranty: 12 months

Schneider Electric TSXAEY1614 Modicon Premium Analog Input Module

The Schneider Electric TSXAEY1614 is a standard-format, 16-channel analog input module for the Modicon Premium programmable logic controller (PLC) platform. It acquires low-level voltage signals up to +/-80 mV and thermocouple inputs (types B, E, J, K, L, N, R, S, T, and U) with 16-bit analog-to-digital conversion and 70 ms nominal read cycle time per channel.

Thermocouple and Low-Level Signal Acquisition

Sixteen dedicated inputs accept thermocouple sensors or +/-80 mV low-level voltage signals for temperature and process monitoring. Because millivolt-level thermocouple outputs are sensitive to electrical noise and stray potentials, verify sensor type configuration, cold-junction handling, and shielded cabling during engineering setup.

With 16-bit resolution and a 70 ms nominal read cycle time per channel, scan timing scales across active channels. Check total loop update time against control loop requirements before assigning fast-changing temperature points.

Isolation, Wiring, and Environmental Limits

The module provides 1000 Vrms channel-to-bus and channel-to-ground isolation, rated for 250 V AC / 280 V AC common mode voltage and 250 V DC common mode to earth. Field connections use two 25-pin SUB-D connectors, and current draw from the rack is 300 mA at 5 V DC.

Mechanical and environmental ratings include a standard module format, IP20 ingress protection, approximate weight of 0.35 kg, operating temperature from 0 to 60 deg C, and storage temperature from -25 to 70 deg C. Keep panel wiring clear of high-voltage power conductors to preserve low-level signal integrity.

Technical Specifications

Parameter Specification
Model TSXAEY1614
Brand Schneider Electric
Product Series Modicon Premium
Product Type Analog Input Module
Number of Inputs 16 channels
Input Type Thermocouple / Voltage
Thermocouple Types B, E, J, K, L, N, R, S, T, U
Voltage Input Range +/-80 mV
Analog-to-Digital Conversion 16 bits
Nominal Read Cycle Time 70 ms per channel
Channel-to-Bus Isolation 1000 Vrms
Channel-to-Ground Isolation 1000 Vrms
Common Mode Voltage 250 V AC / 280 V AC
Common Mode to Earth 250 V DC
Electrical Connection 2 x 25-pin SUB-D connectors
Current Consumption 300 mA at 5 V DC
Module Format Standard
Operating Temperature 0-60 deg C
Storage Temperature -25-70 deg C
Ingress Protection IP20
Weight Approximately 0.35 kg

Frequently Asked Questions

Q: Which sensors and voltage signals can the TSXAEY1614 measure? A: It supports thermocouples of types B, E, J, K, L, N, R, S, T, and U as well as low-level voltage inputs up to +/-80 mV across 16 channels. Confirm channel configuration and sensor types match the connected probes in your Modicon Premium project.

Q: What wiring and isolation limits apply to the TSXAEY1614? A: Connections are made via two 25-pin SUB-D connectors, with 1000 Vrms channel-to-bus and channel-to-ground isolation, 250 V AC / 280 V AC common mode voltage, and 250 V DC common mode to earth. Verify connector pinouts, thermocouple extension wire matching, and common-mode voltage limits during installation.

You may also like