RF523 3BSE006802R1 ABB Advant OCS Subrack Modules
Manufacturer: ABB
-
Part Number: RF523 3BSE006802R1
Condition：New with Original Package
Product Type: PLC Chassis Modules
-
Country of Origin: Sweden
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
ABB RF523 Advant OCS Subrack Module
The ABB RF523 3BSE006802R1, also cataloged as the RF523 Subrack Module, operates as a dedicated hardware component for mechanical housing and backplane power distribution within ABB Advant OCS and AC400 control platforms. Equipped with an integrated BB512 backplane, this 18-slot framework delivers direct electrical routing and 24 VDC power buses across mounted controller cards and I/O interface units.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | RF523 |
| Brand | ABB |
| Origin | Sweden |
| Weight | 2.5 kg |
| Dimensions | 495 x 360 x 499 mm |
| Operating Temp | -20 to +60 deg C |
| Power Consumption | 24 VDC input supply |
| Part Number | 3BSE006802R1 |
| Product Type | Subrack Module |
| Backplane Model | Integrated BB512 backplane |
| Slot Capacity | 18 slots |
| System Compatibility | AC 400, Advant OCS with MOD 300 software |
| Relative Humidity | 5% to 95% non-condensing |
| Mounting Type | Front-mounted subrack assembly |
| Ingress Protection | IP20 |
Deterministic Network & Backplane Integration
The ABB RF523 chassis incorporates the BB512 backplane matrix to optimize backplane bus communication velocity Licences during high-speed inter-module data transfers. The 18-slot layout facilitates scalable I/O density scaling across complex process architectures while preserving physical channel separation. Onboard bus traces maintain signal integrity and firmware flash compatibility during controller bus synchronization across all populated slots.
Frequently Asked Questions
Q: Does the RF523 subrack backplane support hot-swapping of individual I/O modules?
A: Hot-swapping depends on the specific card installed; field engineers must verify that the target module supports live insertion before removing it from the BB512 backplane bus.
Q: How is the 24 VDC power rail distributed across the 18 subrack slots?
A: Dual power bus traces embedded in the BB512 backplane route 24 VDC directly to each card position, ensuring balanced voltage delivery across all populated slots.
Q: What precautions prevent backplane signal degradation across unused slots?
A: Unused positions on the 18-slot chassis should receive protective slot covers to shield the exposed BB512 backplane connectors from dust and atmospheric contaminants.
Field Installation Guidelines
Mount the RF523 subrack assembly into a standard 19-inch industrial enclosure or rack frame using the front mounting flanges. Ensure at least 100 mm of vertical clearance above and below the subrack to facilitate free air movement across mounted modules within the operating range of -20 to +60 deg C.
Establish a low-impedance earth ground path by connecting a heavy-gauge copper grounding strap from the aluminum subrack chassis directly to the enclosure main ground bar. Route 24 VDC power feeds using shielded, stranded wires, separating field signal cabling from high-voltage AC conductors by a minimum distance of 200 mm. Torque all panel mounting fasteners to manufacturer specifications before populating slots.